RDI Technology Co. Ltd. CA630HR User Manual

Page 1

Contents:

Quick Start Guide

Digital Wireless Color

Camera with Stand

Wireless Antenna

for camera

Power Adaptor

for camera*

• Aim the Cameras to best optimize the viewing area:

Select a location for the camera that provides a clear

view of the area you want to monitor, which is free from

dust, and is not in line-of-sight to a strong light source

or direct sunlight.

• Avoid installing the cameras where there are thick

walls, obstructions, or interference (i.e. transformers,

microwave ovens or other electrical equipment)

between the Cameras and the Receiver.

• Select a location for the camera that has an ambient

temperature between 14°F~122°F (-10°C~50°C)

• Before starting permanent installation, have another

person hold the camera for you while you verify its

performance by observing the image on a monitor.

InstALLInG tHe CAMeRA

Before you install the camera, carefully plan where and how it will be

positioned, and where you will route the cable that connects the

camera to the power adaptor.

InstALLAtIon WARnInGs

1. Carefully unpack the Camera.

2. Mount the stand to the wall:

   • Mark the position of the
      screw holes on the wall.
   • Drill holes and insert the
      drywall plugs as needed.
   • Firmly attach the stand
      to the wall using the
      provided screws.

3. Attach the Antenna to the

Camera prior to mounting.

4. Place the camera in the

   desired mounting position.
   Tighten the thumbscrews
   to secure the camera to the
   Stand. Adjust the angle of
   the camera until the
   desired view is set.

*May not be exactly as shown

NOTE: AVOID INSTALLING IN A

LOCATION WHICH REQUIRES

THE WIRELESS SIGNAL TO PASS

THROUGH CEMENT, CONCRETE

AND METAL STRUCTURES. THIS

WILL REDUCE THE

TRANSMISSION RANGE.

Mounting

Hardware Kit

CoLoR DIGItAL WIReLess InDooR/oUtDooR

ACCessoRy MotIon CAMeRA

qUICk stARt GUIDe

CAMeRA oVeRVIeW

1. PIR sensor: Passive IR motion sensor for more accurate

motion recording.

2. Microphone: Built-in microphone underneath camera body.

3. Lens: Camera lens.

4. night Vision IR: Night vision IR LEDs used for viewing in

complete darkness.

5. speaker: Speaker for two-way audio.

6. Pair: Pairing button.

7. Antenna: Wireless antenna.

8. Power Cable: Connect the included power adapter to the

cable extending from the camera.