Shenzhen Neo-Point Communication LANSO User Manual
PAGE 1 / 6
LANSO A6+ user guide
IMPORTANT
Before using your LANSO A6+ headset for the first time, you must charge it
continuously for about 8 hours, until the red indicator light turns off. Please
refer to the “Charging LANSO A6+” section of this manual.
1. Introduction
The LANSO A6+ headset is a wireless headset based on the Bluetooth ®
technology.
The Bluetooth ® technology is a standard for wireless short distance radio
communications. Devices like a headset and a mobile phone can communicate with
each other without wires within approximately 10 meters.
LANSO A6+ is a qualified Bluetooth ® headset that complies with the Bluetooth ®
1.1 protocol. It supports two profiles: Headset Profile and Hands-free profile.
It will work with any qualified Bluetooth ® device that supports the Headset profile or
the Hands-free profile.
Your LANSO A6+ will allow you to take a call, initiate a call (if your phone has voice
controls), and adjust volume directly on your headset, without the need to touch your
mobile phone.
The LANSO A6+ headset has 3 buttons:
• “TALK “Button (central button),
• 1 “VOL+ “button,
• 1
“VOL-
“button.
Please refer to the picture on page 2.
Before using LANSO A6+ headset, you must:
. Charge the headset; please refer to the “Charging LANSO A6+” section of this user
guide.
. Pair the headset with a mobile phone. Please refer to the “Pairing LANSO A6+”
section of this manual.
Before using LANSO A6+ headset, you must:
. Charge the headset; please refer to the “Charging LANSO A6+” section of this user
guide.
. Pair the headset with a mobile phone. Please refer to the “Pairing LANSO A6+”
section of this manual.