Wanlida Group Co. Ltd. LF-61001 User Manual
- 17 -
Connect CATV or AV signal source to the base station of the unit correctly.
Connect the reciever of the unit correctly.
Push power Switch button the transmitter of the unit to on.
Power supply indicator of
the transmitter of the unit turns green.
Push power Switch button of the reciever of the unit to on.
Power supply indicator lights
yellow, after a while, the reciever of the unit enter the standby status, the light turns
green.
Press
the power button of the
reciever of the unit to
the reciever of the unit
and it
enter the working status,
the light turns red. At this time,
the unit will connect
automatically.
The following screens instances will appear when these phenomenon occur:
1. The screen will display
the following
when the transmitter
is not connected.
Press ENT to rescan
the transmitter.
2. The screen will display the following when the transmitter
is connected.
After a while, the unit is successfully connected.
CONNECTING……
Transmitter not found
ENT to rescan transmitter
Transmitter not found
ENT to rescan transmitter
Using the Wireless
System
System
CONNECTING……