Hawking Technologies Inc. HSB1 User Manual

Page of 35
 
 
 
 

Summary of Contents of user manual for Hawking Technologies Inc. HSB1

  • Page 1: Chapter 1 Introduction
  • Page 2: Specifications CE MARK WARNING This is a Class B product. In a domestic environment, this product may cause radio interference,...
  • Page 3: Physical Description Table of Contents Chapter 1 Introduction ...................................................................................1 1.1 Package Contents ................................................................................... 2 1.2 Features ................................................................................................. 2 1.3 Specifications......................................................................................... 2...
  • Page 4Chapter 1 Introduction Thank you for purchasing the Hawking Technologies Hi-Speed 54M Wireless-G Access Point and Ethernet Bridge. The HWBA54G...
  • Page 5: Chapter 2 Wireless LAN Access Point Connection1.1 Package Contents The HWBA54G includes the following items: l One HWBA54G Access Point/Bridge l One Power Adapter l One...
  • Page 6: 3.1 Getting Started connector) l Connectors: 10/100Mbps RJ-45 x 1 l Power: 12VDC, 0.5A l Transmit Power: 16dBm (Typical) l LEDs: Power,...
  • Page 71.4 Physical Description Front Panel Located on the HWBA54G’s front panel are LED status lights that inform you of the...
  • Page 8Front LED Panel LED Color Status Description Power Green Lit Power is supplied. Off No Power. Wireless Green Flash Antenna...
  • Page 9 keeping your original configurations intact. 2) If problems continue to persist or you have forgotten your password, pressing the...
  • Page 10Chapter 2 Wireless LAN Access Point Connection 1. Choosing a location for the access point. Usually, the best place for...
  • Page 11: 3.2 Configuring the Access PointChapter 3 Wireless LAN Access Point Configuration 3.1 Getting Started This Access Point provides web-based configuration tools, allowing you to...
  • Page 12: Client Mode configuration the list of Network Components and then click the Properties button. 7. Check each of the tabs and verify...
  • Page 13 1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear. 2....
  • Page 14 4. You can now begin configuring the Access Point. Accessing the Configuration Menu From a Wireless Station 1. Make...
  • Page 15: AP Mode configuration3.2 Configuring the Access Point The HWBA54G supports 3 modes of use: Client Bridge, Access Point, and Bridge modes. “Client...
  • Page 163.2.1 Client Bridge Mode configuration This configuration is used to let a network device with only wired Ethernet functionality to...
  • Page 17MAC Cloning Mode Disabled: It will use it’s own MAC address to access the wireless LAN. Enabled: It will use...
  • Page 18 Short: It is suitable for high traffic wireless network Long: It can provide more reliable communication Transmit Rate When...
  • Page 193.2.2 AP Mode configuration This Access Point supports AP modes. “Access Point Mode” provides pure access point function. The simplest...
  • Page 20: P2P Mode configurationBroadcast SSID It will respond to Broadcast SSID requests. If you enable this function, every wireless station located within the...
  • Page 21: PMP Mode configuration3.2.3 P2P Mode configuration This function provides to bridge more than 2 wired Ethernet networks together by wireless LAN. You...
  • Page 22 There are 14 channels available. Security Disable: Disable the security function. WEP: WEP is an authentication algorithm, which protects...
  • Page 23: WEP Setting3.2.4 PMP Mode Configuration This function allows to bridge more than 2 wired Ethernet networks together by wireless LAN. You...
  • Page 24 Channel 1-14 (Japan) Channel 1-13 (Europe) There are 14 channels available. Security Disable: Disable the security function. WEP: WEP...
  • Page 25: WPA Setting3.2.5 WEP Setting Parameter Description WEP Length WEP-64: input 10-digit Hex values (in the “A-F”, “a-f” and “0-9” range) or...
  • Page 26: Advanced Setting3.2.6 WPA Setting Parameter Description Authentication Type The Pre-shared key is used to authenticate and encrypt data transmitted in the...
  • Page 27: Access Filter3.2.7 Advanced Setting Parameter Description Beacon Interval (20-1000) The period of time that this access point broadcast a beacon. Beacon...
  • Page 28 multicast messages. Protection Mode It provides best performance for 11g transmission when you enable it. Transmit Rate When you...
  • Page 29: Status Setup3.2.8 Access Filter The HWBA54G allows you to provide a Filter List of MAC addresses that are allowed/denied access associated...
  • Page 30: Admin SetupParameter Description MAC Filtering You can enable or disable the MAC Filtering function. Filter Mode If you select “Only deny...
  • Page 313.2.9 Status Setup Parameter Description Ethernet It shows the default IP address, Subnet Mask, Gateway and Link status information. Wireless...
  • Page 32: LAN Setup3.2.10 Admin Setup Parameter Description FW Version It shows current FW version. FW Upgrade This tool allows you to upgrade...
  • Page 33: Charpter 4 Troubleshooting3.2.11 LAN Setup Parameter Description Device Name It shows current FW version. Automatic IP Selecting this option is not advised...
  • Page 34Chapter4 Troubleshooting This chapter provides solutions to problems usually encountered during the installation and operation of the Access Point. 1....
  • Page 35 based on a 64(40)-bit shared key algorithm. 6. What is a MAC Address? The Media Access Control (MAC) address...
downloadlike
ArtboardArtboardArtboard
Report Bug