Ever Sparkle Technologies Ltd. 87027T03 User Manual

User manunal 

The device which was inserted to the REMOTO is the DONGLE, and the handle port 

is NUNCHUCK. 

1.Connect the WII correctly, in order to make the REMOTE work normally. 

2.Insert the DONGLE to the REMOTE, then the DONGLE will start automatically 

and the LED will blink. At this moment, if you press the key “LINK” for one second, 

the LED will blink more rapidly. 

3. Load the 2*AAA battery to the NUNCHUCK, then press the POWER key to start it 

(pressing any key can start it) .If the LED blinks, it expresses it starts normally. Then 

press the key “LINK”, it will connect with the DONGLE after 1 to 3 seconds. When 

the LED of NUNCHUCK and DONGLE are on, it stands for connecting successfully. 

Remarks: Step 2 and 3 above, which should be operated when the equipment was 

connected firstly. If the equipment had been connected before, it needn’t connect 

again. And when you start it, it will be connected automatically without pressing any 

key. 

4. we can play games normally after connecting correctly. 

5. We can turn off the DONGLE by pressing the POWER key of DONGLE for three 

seconds, and we can start it by pressing the POWER key. So does the NUNCHUCK 

POWER key.   

6. Put the optical disk “WII SPORTS” into the WII, and join the games according to 

the operating hints, and choose the BOXING to play games. (You must choose the 

BOXING to join games firstly, because the other games can’t support NUNCHUCK)