Acom International Inc A1010 User Manual
Exhibit 6 page 15 of 15
6. SPECIFICATIONS
6-1. Parameters
a) Frequency Coverage: All amateur bands in the 1.8-29.7MHz frequency range; extensions and/or
changes on request.
b) Power Output: 700 W PEP or 500 W continuous carrier.
c) Intermodulation Distortion: Better than 35 dB below rated output.
d) Hum and noise: Better than 40 dB below rated output.
e) Harmonic Output Suppression: Better than 50 dB below rated output.
f) Input and Output Impedance:
- Nominal value: 50 Ohm unbalanced, UHF (SO-239) type connectors;
- Input circuit: broadband, VSWR less than 1.3:1, 1.8-30 MHz continuously (no tuning, no switching);
- Bypass path: VSWR less than 1.1:1, 1.8-30 MHz continuously, 200 W maximum;
- Output (antenna) impedance matching capability: VSWR up to 3:1 or higher.
g) RF Gain: 11dB typically, frequency response less than 1dB (50 to 70 W drive power for rated output).
h) Primary Power: 85-132 V/170-264 V ac (100, 110, 120, 200, 210, 220, 230 & 240 V nominal taps), +10%
-15% tol.), 50-60 Hz, single phase, 1200 VA.
i) Complies with CE safety and electromagnetic compatibility requirements as well as FCC-regulations (10 &
12 m band locks provided).
l) Size & Weight (operating): WxDxH: 406x315x150mm, 16kg (16x12.4x5.9 inches, 35.2Lbs).
changes on request.
b) Power Output: 700 W PEP or 500 W continuous carrier.
c) Intermodulation Distortion: Better than 35 dB below rated output.
d) Hum and noise: Better than 40 dB below rated output.
e) Harmonic Output Suppression: Better than 50 dB below rated output.
f) Input and Output Impedance:
- Nominal value: 50 Ohm unbalanced, UHF (SO-239) type connectors;
- Input circuit: broadband, VSWR less than 1.3:1, 1.8-30 MHz continuously (no tuning, no switching);
- Bypass path: VSWR less than 1.1:1, 1.8-30 MHz continuously, 200 W maximum;
- Output (antenna) impedance matching capability: VSWR up to 3:1 or higher.
g) RF Gain: 11dB typically, frequency response less than 1dB (50 to 70 W drive power for rated output).
h) Primary Power: 85-132 V/170-264 V ac (100, 110, 120, 200, 210, 220, 230 & 240 V nominal taps), +10%
-15% tol.), 50-60 Hz, single phase, 1200 VA.
i) Complies with CE safety and electromagnetic compatibility requirements as well as FCC-regulations (10 &
12 m band locks provided).
l) Size & Weight (operating): WxDxH: 406x315x150mm, 16kg (16x12.4x5.9 inches, 35.2Lbs).
m) Operating environments:
- Temperature range: 0 to +50 degrees Celsius;
- Humidity: up to 95% @ +35 degrees Celsius.
- Height: up to 3000 m above sea level without output deterioration.
- Temperature range: 0 to +50 degrees Celsius;
- Humidity: up to 95% @ +35 degrees Celsius.
- Height: up to 3000 m above sea level without output deterioration.
6-2. Functions
a) Antenna Impedance Matching Process: aided by a plate-load True Resistance Indicator (TRI).
b) Two antenna outputs selectable by a button on the front panel.
c) Protections:
- Cover interlock for operator's safety;
- Inrush power-on current limited to the nominal consumption;
- Control grid, screen grid, and plate currents;
- T/R sequencing;
- Antenna relay contacts, including RF power induced in antenna from another nearby transmitter;
- Antenna matching quality;
- Reflected power.
e) LED bar-graphs for forward peak power and reflected power.
h) Tube: a single Svetlana 4CX800A (GU74B) high-performance ceramic-metal tetrode with plate
dissipation of 800 W, grid driven, forced air-cooling.
b) Two antenna outputs selectable by a button on the front panel.
c) Protections:
- Cover interlock for operator's safety;
- Inrush power-on current limited to the nominal consumption;
- Control grid, screen grid, and plate currents;
- T/R sequencing;
- Antenna relay contacts, including RF power induced in antenna from another nearby transmitter;
- Antenna matching quality;
- Reflected power.
e) LED bar-graphs for forward peak power and reflected power.
h) Tube: a single Svetlana 4CX800A (GU74B) high-performance ceramic-metal tetrode with plate
dissipation of 800 W, grid driven, forced air-cooling.
6-3. Storage and Shipment
CAUTION
Should it be necessary to ship the amplifier, use the original packing as described below.
Switch off the amplifier, pull the line (mains) plug out of the outlet, disconnect all cables from the rear panel
of the amplifier (remove the ground connection the last), and then pack the amplifier in its original carton.
a) Acceptable storage environment: The amplifier may be kept packed in a dry, ventilated and unheated
location (with no chemically active substances such as acids or alkalis) within the following environment
ranges:
Switch off the amplifier, pull the line (mains) plug out of the outlet, disconnect all cables from the rear panel
of the amplifier (remove the ground connection the last), and then pack the amplifier in its original carton.
a) Acceptable storage environment: The amplifier may be kept packed in a dry, ventilated and unheated
location (with no chemically active substances such as acids or alkalis) within the following environment
ranges:
- Temperature range: -40 to +70 degrees Celsius
- Humidity: up to 75% @ +35 degrees Celsius.
- Humidity: up to 75% @ +35 degrees Celsius.
b) Shipping Size and Weight: WxDxH: 530x470x280mm,
18kg (21x18.5x11 inches, 39.6Lbs).
c) All types of transportation may be used, including storage in an aircraft baggage compartment at up to
12000 meters above sea level.
12000 meters above sea level.