Dong guan Synst Electronics.Co. Ltd NYNECRUISE User Manual
Nyne Cruiser
Safety Guide
EN
Bluetooth Speaker Series
EN
Specifications are subject to change without notice.
All registered and unregistered trademarks are property
of their respective owners.
Nyne Multimedia Inc.
All rights reserved.
SG-Cruiser-10-4-2013-V. 1.0
nyne.com
Important
Safety
The lightning flash
with arrowhead
symbol within an
equilateral triangle
is intended to alert
the user to the presence of un-
isolated, dangerous voltage within
the inside of the device that may be
of sufficient magnitude to constitute a
risk of electric shock to persons.
Warning: To reduce the risk of electric
Warning: To reduce the risk of electric
shock, do not remove cover (or back)
as there are no user-serviceable parts
inside. Refer servicing to qualified
personnel.
The exclamation
point within an
equilateral triangle
is intended to alert
the user to the presence of important
operating and servicing instructions
in the literature accompanying the
device.
WARNING: To reduce the risk of fire
WARNING: To reduce the risk of fire
or electric shock, do not expose this
apparatus to rain or moisture. The
apparatus shall not be exposed to
dripping or splashing and that objects
filled with liquids, such as vases, shall
not be placed on apparatus.
WARNING: The battery (battery or
WARNING: The battery (battery or
batteries or battery pack) shall not be
exposed to excessive heat such as
sunshine, fire or the like.
Read these instructions before
Read these instructions before
operation.
Keep these instructions for future
Keep these instructions for future
reference.
Follow all instructions for installation,
Follow all instructions for installation,
use and maintenance of the device.
To avoid tilt or drop, place the device
To avoid tilt or drop, place the device
on a flat and hard surface.
To clean the device, disconnect
To clean the device, disconnect
power first. Clean only with soft and
dry cloth.
To ensure compatibility, only use
To ensure compatibility, only use
accessories recommended by the
manufacturer.
When the device is suddenly moved
When the device is suddenly moved
from cold to warm surroundings,
condensation may form in the
housing of the device. Before use,
leave the device in the warm
environment until the moisture
evaporates.
Keep the device away from heat
Keep the device away from heat
sources, such as a radiator, heater,
oven, amplifier, naked flames or
direct sunlight.
No naked flame sources, such as
No naked flame sources, such as
lighted candles, should be placed on
the apparatus.
Never block any ventilation openings.
Never block any ventilation openings.
Install in accordance with the
manufacture’s instructions.
•
Do not expose the device to
sand or dust, or cover it with
items, such as newspapers, table
cloths,
or curtains.
•
Do not operate the device in
an enclosed cabinet. Leave
sufficient free space around the
device for adequate ventilation.
Do not attempt to repair or service
the device yourself. Opening or
removing the cabinet may expose
you to electric shock, and other
hazards. If repair is required, contact
your dealer and refer all servicing to
qualified service personnel.
Do not use the device if any
Do not use the device if any
abnormality occurs. If any smoke or
odor becomes apparent, contact
your dealer immediately. Do not try to
repair the device yourself.
Avoid using dropped or damaged
Avoid using dropped or damaged
appliances. If the device is dropped
and the housing is damaged, the
internal components may not function
normally. Stop use and contact your
dealer for repair. Continued use of
the device may cause fire or electric
shock.
To reduce the risk of electric shock,
To reduce the risk of electric shock,
do not touch any connector with wet
hands.
Never remove the housing of the
Never remove the housing of the
device.
Never lubricate any part of the
Never lubricate any part of the
device.
Never place the device on top of any
Never place the device on top of any
other electrical equipment.
This equipment is a Class II or double
insulated electrical appliance. It has
been designed in such a way that it
does not require a safety connection
to electrical earth.
Notice
Modification
Any modification (such as removing
the speaker grill) to the device,
without prior authorization from
the manufacturer, may void your
warranty and authority to operate
the device.
FCC compliance statement
This equipment has been tested
and found to comply with the
limits for a Class B digital device,
pursuant to part 15 of the FCC
Rules. These limits are designed
to provide reasonable protection
against harmful interference in a
residential installation. This equipment
generates, uses, and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instruction manual, may
cause harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
•
Relocate the receiving antenna.
•
Increase the separation
between the equipment and
receiver.
•
Connect the equipment into
an outlet on a circuit different
from that to which the receiver is
connected.
EN
•
Consult the dealer or an
experienced radio/TV technician
for help.
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) This device must
accept any interference received,
including interference that may
cause undesired operation.
This Class B digital apparatus complies
This Class B digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la classe
Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada.
This device complies with FCC RF
This device complies with FCC RF
radiation exposure limits set forth for
an uncontrolled environment.
This device and its antenna(s) must
This device and its antenna(s) must
not be co-located or conjunction
with any other antenna or transmitter.
CE statement
This product complies with the radio
interference requirements of the
European Community.
Recycling
Packaging
Observe the local regulations for
how to dispose of the packaging
materials.
WEEE NOTICE
The Directive on Waste Electrical and
Electronic Equipment (WEEE), which
entered into force as European law
on 13th February 2003, resulted in a
major change in the treatment of
electrical equipment at end - of - life.
The purpose of this Directive is, as a
The purpose of this Directive is, as a
first priority, the prevention of WEEE,
and in addition, to promote the
reuse, recycling and other forms
of recovery of such wastes so as to
reduce disposal.
The WEEE logo on the product or
The WEEE logo on the product or
on its box indicating collection for
electrical and electronic equipment
consists of the crossed -out wheeled
bin, as shown below.
This product must not be disposed of
or dumped with your other household
waste. You are liable to dispose
of all your electronic or electrical
waste equipment by relocating over
to the specified collection point
for recycling of such hazardous
waste. Isolated collection and
proper recovery of your electronic
and electrical waste equipment at
the time of disposal will allow us to
help conserving natural resources.
Moreover, proper recycling of the
electronic and electrical waste
equipment will ensure safety of
human health and environment. For
more information about electronic
and electrical waste equipment
disposal, recovery, and collection
points, please contact your local
city center, household waste
disposal service, shop from where
you purchased the equipment, or
manufacturer of the equipment.
ROHS COMPLIANCE
This product is in compliance with
Directive 2011/65/EU of the European
Parliament and of the Council of 8
June 2011 on the restriction of the use
of certain hazardous substances in
electrical and electronic equipment.
FOR PRODUCTS THAT INCLUDE BATTERIES
EU Batteries Directive 2006/66/EC
EU Batteries Directive 2006/66/EC
A new battery directive 2006/66/
EC on Battery and Accumulator
replacing directive entered into
force on the 26th September 2008.
The directive applies to all types
of batteries and accumulators
(AA, AAA, button cells, lead acid,
rechargeable packs) including those
incorporated into appliances except
for military, medical and power tool
applications.
The directive sets out rules for
The directive sets out rules for
collection, treatment, recycling and
disposal of batteries, and aims to
prohibit certain hazardous substances
and to improve environmental
performance of batteries and all
operators in the supply chain.
Instructions for Users on Removal, Recycling and Disposal
of Used Batteries
of Used Batteries
To remove the batteries from your
equipment or remote control, reverse
the procedure described in the
owner’s manual for inserting batteries.
For products with a built-in battery
For products with a built-in battery
that lasts for the lifetime of the
product, removal may not be
possible for the user. In this case,
recycling or recovery centers handle
the dismantling of the product and
the removal of the battery. If, for
any reason, it becomes necessary
to replace such a battery, this
procedure must be performed
by authorized service centers. In
the European Union and other
locations, it is illegal to dispose of
any battery with household trash.
All batteries must be disposed
of in an environmentally sound
manner. Contact your local waste-
management officials for information
regarding the environmentally sound
collection, recycling and disposal of
used batteries.
WARNING: Danger of explosion if
WARNING: Danger of explosion if
battery is incorrectly replaced. To
reduce risk of fire or burns, don’t
disassemble, crush, puncture,
short external contacts, expose to
temperature above 60°C (140°F), or
dispose of in fire or water. Replace
only with specified batteries.
The symbol indicating ‘separate
The symbol indicating ‘separate
collection’ for all batteries and
accumulators shall be the crossedout
wheeled bin shown below:
In case of batteries, accumulators
and button cells containing more
than 0.0005 % mercury, more than
0.002 % cadmium or more than
0.004 % lead, shall be marked
with the chemical symbol for the
metal concerned: Hg, Cd or Pb
respectively. Please Refer to the
below symbol:
Copyright
The Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by Nyne
Multimedia Inc. is under license.
Specifications
The technical specifications are subject to change without prior notice.
Output power
2 x 5W
Speaker drivers
2 x 1.5”
S/N
>50dB
THD+N
<10%
Dimension
?
Weight
?
Audio input
1 x 3.5 mm socket
1 x wireless input (Bluetooth)
1 x wireless input (Bluetooth)
Wireless
Bluetooth 4.0
Battery capacitor
3.7V 2200mAh
Play time
?