Dogtra Co. Ltd. ARCHANDSFREE User Manual

20

21

if you turn the rheostat intensity dial, the level on the screen 

may not change but the actual intensity from the receiver/

collar will change in agreement with the dial. In this 

situation, it is ideal to either wait until your transmitter is 

back to working order before emitting a correction, or while 

holding the constant button down slowly turn the Rheostat 

Intensity Dial while watching your dog’s reaction. Do not 

turn the Rheostat Intensity Dial at a rapid increase because 

the receiver/collar will emit a static correction based on the 

level of the Rheostat Intensity Dial, which might not be 

correctly reflected on the LCD screen.

To attach the included belt clip to the transmitter, follow the 

instructions below.
1. Align the belt clip to the grooves on the back of the 

transmitter.
2. With a firm grip, screw on the belt clip using the provided 

Philips head screws.

 Caution!  Tighten until firmly in place. Be careful not to 

                    over tighten.

1. Turn on the receiver/collar and place the test light over 

the contact points as shown in the diagram.

2. The test light will illuminate momentarily when the Nick 

stimulation button is pressed on the transmitter. The light 

will stay lit as long as the Constant button is pressed on 

the transmitter, up to 12 seconds.

3. When the stimulation is increased, the test light will emit 

a brighter light.