Inscape Data Co. AGNVC110W User Manual
NVC100/110 User’s Manual
11
11
11
11 of
of
of
of 51
51
51
51
# 10Base-T:
10Mbps Ethernet connector (RJ-45).
# LINK LED: A green light means that the network cable is in normal condition.
#
LAN LED: When there is traffic on the LAN, a yellow light flickers.
# RS-232 (3 pins):
Used only by developers for modifying a program.
# DC12V, 1A:
Power input of the NVC100/110- 12V/1A.
#### DC-IRIS: Plug in the cable attached on the standard DC-Iris lens (Apply for NVC110).
#### RS-485 and ALARM IN/OUT: Is used for connecting P/T/Z and alarm devices to
NVC100/110. Pin assignments are:
Pin 1
RS-485 Negative (-) input
Pin 2
RS-485 Plus (+) input
Pin 3
Alarm In (-)
Pin 4
Alarm In (+)
Pin 5
Alarm Out (-)
Pin 6
Alarm Out (+)
$
RS-485:
Used for connecting Pan/Tilt/Zoom devices having an RS-485 interface
standard.
$ Alarm In:
It is used for connecting external alarm sensors such as the
infrared
sensors, heat sensor, magnetic sensors, etc.
$
Alarm Output:
It is used for connecting external alarm generators such as sirens,
flashing light, etc. When activated, relay output configures a closed circuit
# VIDEO-IN : External
Video input (composite NTSC, PAL, SECAM)
# Factory Default Reset : Press and hold for 5 second to make factory default configuration
# Antenna Connector : Connect 5dBi antenna supplied with NVC110W (RP-SMA)