Inscape Data Co. AGNVC110W User Manual
NVC100/110 User’s Manual
14
14
14
14 of
of
of
of 51
51
51
51
The NVC100/110 does not function properly if there is no video and audio input- you have to
connect at least one Video In.
Refer to the following table:
connect at least one Video In.
Refer to the following table:
Connectors
Function
Signal description
Number
Video In
Input Video
Connector
Analog video outputs from analog
CCTV camera, DVD, TV etc.,
(NTSC/PAL/SECAM)
CCTV camera, DVD, TV etc.,
(NTSC/PAL/SECAM)
1
LINE-
In/MIC
Audio In
Connects microphone or output from
audio devices.
audio devices.
1
Line Out
Audio Out for
Speaker
When in bi-directional audio mode, the
audio signal from a remote site is
available from this connector. Use a
speaker with an amplifier.
audio signal from a remote site is
available from this connector. Use a
speaker with an amplifier.
1
Alarm In
Connecting
Alarm Sensor
IR sensor, Motion Sensor, Smoke
Detector. . .
Detector. . .
2
Alarm Out
Connecting
Alarm Alerting
Device
SIREN, FLASHING LIGHT, …
2
RS485
PTZ Device
Control
Remote P/T/Z control having RS485
interface.
interface.
1
10Base-T
Network
Connection
Connect the NVC100/110 to an
Ethernet connector from a Hub, PC,
ADSL or Cable modem.
Ethernet connector from a Hub, PC,
ADSL or Cable modem.
1
5. Video connection to NVC100/110
You can connect to the NVC100/110 in video mode by running the “
You can connect to the NVC100/110 in video mode by running the “
NVR100 Software
” program
on your PC. Detailed information on using the “
NVR100
” can be found in the
NVR100 Software
User’s Guide
.