Inscape Data Co. AGNVC110W User Manual

Page of 51
NVC100/110 User’s Manual 
 
 
25
25
25
25 of 
 of 
 of 
 of 51
51
51
51  
-  When the network environment is fixed IP, select ‘LAN’ in the network type, and put the IP 
address, Subnet Mask, Gateway, DNS1 and DNS2 assigned by the network administrator or 
ISP. DNS2 is used when DNS1 does not work. 
When the network environment is PPPoE and the IP address is assigned automatically, select 
‘PPPoE’ in the network type. Next, fill in the ‘User Name’ and ‘Password’ fields with the 
values assigned by the network service provider.
 
 
When the network environment is “automatic IP allocation by DHCP”, select ‘DHCP’ in the 
network type. 
# Refer to 
IP-installer user’s guide
 for “Clone MAC”. 
# Refer to 
IP-installer user’s guide
 for “Host name and domain for Cable Modem”.
 
 
#### 
Port Change: 
You can change the HTTP port, FTP port and RTSP port numbers. The RTSP port 
is used to connect the “Viewer“ to the NVC100/110  ™. 
Each port should have a number below # 65535. 
-  HTTP: default “80” 
-  RTSP: default “554 
 
IP Filtering
: You can restrict the access to the administrator page from IP addresses beyond a 
certain IP address range. 
-  Restrict Administrator Access: Check this box to restrict administrative log on. 
. Base IP Address: Input the IP address of the PC which is intended to be used for log on 
to administrative mode. 
. Mask: This is the same as a subnet mask. It is used to allow administrative logon only to 
the PCs located in the same subnet as the base IP address. If you want to allow 
only one PC to be accessed in administrative mode, set this value to 
255.255.255.255. 
 
E-Mail Setup
 
-  Recv E-Mail Address: Refer to 
IP-installer user’s guide
 for “Recv E-Mail Address”. 
-  Return E-Mail Address: Refer to 
IP-installer user’s guide
 for “Return E-Mail Address”. 
-  Notify for IP Changed: If you check this, the IP address will be sent via E-mail whenever       
the IP address changes. It is sent to the E-mail address set by 
“Recv E-Mail Address”. 
. Title: Is the predefined title of the e-mail message sent to users.