Inscape Data Co. AGNVC110W User Manual
NVC100/110 User’s Manual
29
29
29
29 of
of
of
of 51
51
51
51
reduces the flickering phenomena. If this mode is selected, the electronic
shutter speed is set to 1/100 sec for the NTSC camera while it is set to
1/120 for the PAL camera to synchronize the shutter speed to the AC
current.
shutter speed is set to 1/100 sec for the NTSC camera while it is set to
1/120 for the PAL camera to synchronize the shutter speed to the AC
current.
<Note> : Make sure that you apply this mode only when using an NTSC
camera in a PAL region or a PAL camera in a NTSC region.
Manual
Adjust the amount of light reaching the CCD manually. The Shutter Speed
and Gain sub menus are activated when this mode is selected. Check the
box at the left of each sub menu and click “SAVE” to apply the sub menu.
□ Shutter Speed
and Gain sub menus are activated when this mode is selected. Check the
box at the left of each sub menu and click “SAVE” to apply the sub menu.
□ Shutter Speed
Electronic shutter speed can be selected between 1/60 sec and 1/10000
sec for the NTSC camera. If using a PAL camera, shutter speed can be
selected between 1/50 sec and 1/10000 sec. If using a DC IRIS lens
under manual exposure mode, you will not find a difference in brightness
when controlling the shutter speed because the opening of the IRIS is
automatically adjusted. If using a NON DC IRIS lens, the brightness of
the video will change as you adjust the shutter speed. When using your
camera in low light conditions, set the value to a maximum (1/50 or
1/60) to increase the amount of light reaching CCD.
sec for the NTSC camera. If using a PAL camera, shutter speed can be
selected between 1/50 sec and 1/10000 sec. If using a DC IRIS lens
under manual exposure mode, you will not find a difference in brightness
when controlling the shutter speed because the opening of the IRIS is
automatically adjusted. If using a NON DC IRIS lens, the brightness of
the video will change as you adjust the shutter speed. When using your
camera in low light conditions, set the value to a maximum (1/50 or
1/60) to increase the amount of light reaching CCD.
□ Gain
You can adjust the gain of CCD sensor in accordance with the speed of
the shutter. If you select Auto, the gain is automatically adjusted in
accordance with the situation. Alternatively, you can select one of 10, 16,
22 or 28dB to set the maximum gain. Setting the gain to a higher value
will ensure you can enhance the brightness under low light conditions,
while it amplifying noise level.
the shutter. If you select Auto, the gain is automatically adjusted in
accordance with the situation. Alternatively, you can select one of 10, 16,
22 or 28dB to set the maximum gain. Setting the gain to a higher value
will ensure you can enhance the brightness under low light conditions,
while it amplifying noise level.