Inscape Data Co. AGNVC110W User Manual
NVC100/110 User’s Manual
41
41
41
41 of
of
of
of 51
51
51
51
find a screen as shown in Figure 5-12. Click the UPGRADE button to initiate the upgrade. All
the upgrade sequences will be performed automatically.
the upgrade sequences will be performed automatically.
#### Manual Upgrade
-
System S/W Upgrade: Upgrade the system software installed in the server via the
network. System software needed for the upgrade can be downloaded from
Inscape Data’s home page. Refer to
Inscape Data’s home page. Refer to
[6.4. How To Upgrade Your NVC100/110
System]
.
- Bootloader Upgrade: Upgrade the bootloader installed in the server via the network.
The bootloader needed for the upgrade can be downloaded from Inscape Data’s
home page. Refer to
home page. Refer to
[6.4. How To Upgrade Your NVC100/110 System]
.
- Add the PTZ File: Add a new PTZ driver software via the network. The PTZ driver can
be downloaded from Inscape Data’s home page. Refer to
[6.4. How To Upgrade
Your NVC100/110 System]
.
#
Factory Default Setting
: Re-initialize the NVC100/110 to the factory default state.
#
System Reset
: Perform a remote reset by clicking the “CONFIRM” button.
Once the NVC100/110 is re-initialized to the factory default state, it should be set up
again using the IP-Installer.
All previous connections will be disconnected upon reset. The NVC100/110 does not
resume the connections and the users must re-connect to the server manually
resume the connections and the users must re-connect to the server manually
.