Homewerks Worldwide LLC 7130-04-BT User Manual

5

Before beginning assembly of product, make sure all parts are present. Compare parts with package 
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble 
the product.  
Tools Required for Assembly (not included): Hammer, Drill Bits, Flathead Screwdriver, Wire Nuts, Nails, 
Duct Tape, Phillips Screwdriver, Utility Knife
Helpful Tools (not included): Electric Drill, Wood Screws
WARNING: Turn off electricity at breaker box before beginning installation.
Carefully remove unit from carton.
Check area above installation location to be sure that wiring can run to the planned location and that 
duct work can be run and the area is sufficient for proper ventilation.
Inspect duct work and wiring before proceeding with installation.
Before installation, provide inspection and future maintenance access at a location that will not interfere 
with installation work.
You may need the help of a second person to install this fan; one person on the attic side and one on 
the room side.
Note: 

Installations may vary depending on how the previous bath fan was installed. Supplies necessary  

for the installation of your bath fan are not all included; however, most are available at your local 
home improvement or hardware store.

Ceiling  

Opening (L)

Ceiling  

Opening (W)

Ceiling  

Opening (H)

7-1/2 in.

7-5/32 in.

7 in.

www.homewerksww.com