Desma Co. Ltd. BT15X User Manual
TURN OFF THE HEADSET
When the headset is in stand-by mode, press the main button for 3
seconds, you will hear a tone from the speaker and see the Blue light
flashing. The headset will be turned off. It will also disconnect with
the paired device.
PAIRING WITH THE MOBILE PHONE
Pairing with your mobile phone:
1. Hold the headset and mobile phone in close proximity.
2. Turn off the headset, lighting indicators shall all be off.
3. Press and hold the main button key for up to 6 seconds. You will
hear a tone and the blue LED and red LED will flash at intervals.
At this moment, the headset is in the pairing mode.
4. Perform a device discovery (search or scan) from the mobile phone.
For details about device discovery consult your phone’s user guide.
5. Enter the pass key “0000” to pair the headset with the phone
(Pairing is successful when the headset blue light is flashing)
6. Link your headset to the mobile phone to establish the audio
connection. You can now place and receive calls directly on your
headset.
7. If you want to quit the pairing mode, please press the main button
again.
USING YOUR HEADSET
Make a phone call using the phone key pad
You can use the phone as usual to dial a number. The tones and audio
signals are automatically transferred to your headset.
Make a phone call using voice activation
Some phones allow you to use a voice-dialing feature. The voice dial
function must be activated and voice tags already recorded. Please
refer to the phone user guide for instructions on storing voice tags.
1. Press the main button, a tone prompts you to say the name of the
person you wish to call as entered in the phonebook.
2. Call out the voice tag name, the phone will automatically dial.
Make a phone call using the redial function
Press Volume up 2 seconds to redial the number.
Hang up a phone call from the headset
To hand up a call, press the main button.
Receiving a call
A ring tone will sound in your headset. Just press the main button to
answer the call.
Transferring a call from the headset to your phone:
Press and hold main button for 2 seconds – the call will transfer from
the headset to your phone.
Transferring a call from your phone to the headset:
Generally speaking, just turn the headset power on and then press the
main button - the call will transfer from your phone to the headset.