Kennet Co. Ltd. KR24GT User Manual
● Transmitter
1.Main power switch:
Slip to “入“ and see red mark show main power on.
Slip to “切”and see black mark show main power off.
2. Mic input jack:for ψ3.5mm ECM microphone and
Mono plug
3. Power/Transmission indicator:
LED lights green when unit turn on and transmit.
LED lights red when unit standby.
After 3 min when microphone mute or almost quite
environment, unit will change to standby mode.
And you can call wake-up when microphone signal
happen again.
If microphone still not turn on over 15min, transmitter
will turn off itself to save power .
And you should re-press PWR to turn on when you
want to work.
4. LCD screen:
(1) 1~16 channel display
(2) Battery capacity display: Unit will turn off after
battery display show empty and flash 10 times.
5. Mute switch:
Slip to “入“ means microphone normal work.
Slip to “切”means microphone function off.
6. Power ON/OFF button:
Press and hold on 1 second to turn on.
Press and hold on 2 seconds to turn off.
7. Channel buttons:
Press“+” to up channel
Press “-” to down channel
8. Fastener:to hang up cord.
9. Built-in microphone: Work when external
microphone do not plug in.
10. Battery cover
11. Battery compartment: AA-type*2pcs
12. Charging interface : support standard USB charger.
● Receiver
1.
Main power switch:
Slip to “入“ and see red mark show main power on.
Slip to “切”and see black mark show main power off.
2. Volume control: for volume adjustment
3. Earphone jack : for
Φ3.5mm mono-type plug
4. Power/Reception indicator:
LED lights red when unit turn on and no reception.
LED lights green when unit receive signal.
If unit do
not receive signal over 15min, unit will
turn off itself to save power .
And you should re-press PWR to turn on when
you
want to work.
5. LCD screen:
(1) 1~16 channel display
(2) Battery capacity display: Unit will turn off
after
battery display show empty and flash 10 times.
6. Power ON/OFF button
Press and hold on 1 second to turn on.
Press and hold on 2 seconds to turn off.
7. Channel buttons:
Press“+” to up channel
Press “-” to down channel
8. Fastener: to hand up cord.
9. Battery cover
10. Battery compartment: AAA-type*2pcs
2