Controlled Speed Engineering Ltd CSE035 User Manual

Page of 20
9
This manual is the intellectual copyright of Sterling Stairlifts. No changes may be made without prior consultation with Sterling. This manual may not be reprinted without the agreement of Sterling. 
©
Operating your Sterling Stairlift
Push or pull either
lever to swivel the
seat
Fig. 11
Fig. 12
NEVER USE THE STAIRLIFT WITH THE SEAT
IN THIS POSITION!
To operate a
powered swivel
keep the lever
pushed in the
direction the lift
was travelling
Push or pull either
lever to swivel the
seat
Operating the Swivel. (Not on perch seats)
A swivel seat is provided to enable you to mount/
dismount the seat more easily at the top of the
stairs by swivelling you on to the landing.
To operate the seat swivel, wait until the
stairlift has stopped.
The lever (Fig. 11) needs to be held up or
down whilst you start to swivel. If you release
the swivel lever, the seat will lock first at 45
o
,
then at 90
o
.
You should not attempt to leave the seat until it
as firmly ‘clicked’ into its locked position (Fig.12).
Operating the Powered Swivel
To operate the powered swivel, when you
reach the top (or bottom) of the stairs simply
keep the direction lever pressed in the
direction you were travelling. The seat will
swivel 90
O
 and stop. Release the lever
SAFETY PRECAUTIONS
NEVER
Swivel the seat without the lap belt fastened.
NEVER
Mount or dismount the swivel seat unless it
is locked in position
NEVER
Try to operate the swivel seat whilst the
stairlift is in motion.  (As a safety precaution,
should you try to use it whilst the lift is in
motion, it will cause the lift to stop).
ALWAYS
Use the swivel seat to travel up or down the
staircase in the correct position (i.e. facing
directly across the staircase).