YEALINK NETWORK TECHNOLOGY CO. LTD. DD10 User Manual
3
DD Phone Mode
Before using a IP phone as a DECT desk phone, you should
Before using a IP phone as a DECT desk phone, you should
enable the DD phone mode first.
To enable the DD phone mode when the IP phone is
To enable the DD phone mode when the IP phone is
powered off:
1. Assemble the DD10K.
2. Power on the IP phone.
The DD phone mode is enabled automatically after the IP
phone is started up.
To enable the DD phone mode when the IP phone is
1. Assemble the DD10K.
2. Power on the IP phone.
The DD phone mode is enabled automatically after the IP
phone is started up.
To enable the DD phone mode when the IP phone is
powered on:
1. Assemble the DD10K.
The LCD screen prompts “DECT dongle is inserted, reboot
and switch to DD Phone mode?”
2. Press the
1. Assemble the DD10K.
The LCD screen prompts “DECT dongle is inserted, reboot
and switch to DD Phone mode?”
2. Press the
OK soft key.
The DD phone mode is enabled automatically after the IP
phone is restarted.
Registration
You can register up to 8 DD phones (for W60B) or 5 DD
phone is restarted.
Registration
You can register up to 8 DD phones (for W60B) or 5 DD
phones (for W52P) to one base station. Each DD phone can
be registered to only one base station.
Before registering the DD phone, make sure the base station
Before registering the DD phone, make sure the base station
is in registration mode (long press on the base station till
the registration LED flashes).
To register the DD phone when the phone screen
To register the DD phone when the phone screen
prompts “Unregistered!”, do one of the following:
A. Press the
A. Press the
Reg soft key to register quickly.
B1.Do one of the following:
– Press the
OK soft key, and then select Register
Handset.
–Press
and then select
Settings->Registration->
Register Handset.
Getting Started