YEALINK NETWORK TECHNOLOGY CO. LTD. T19P User Manual

Getting Started

To connect the PoE:

Note

1
.

Connect the Ethernet cable between the Internet port on the phone and an

available port on the in-line power switch/hub.

If in- line power switch/hub is provided, you don’t need to connect the phone to the power

adapter. Make sure the switch/hub is PoE-compliant.

The phone can also share the network with another network device such as a PC

(personal computer). It is an optional connection.

Important! Do not unplug or remove power to the phone while it is updating firmware

and configurations.

After your phone is powered on, the system boots up and performs the following steps:

Automatic Phone Initialization

The phone finishes the initialization by loading the saved configuration. The LCD screen

displays “Initializing…please wait” during this process.

DHCP (Dynamic Host Configuration Protocol)

The phone attempts to contact a DHCP server in your network to obtain valid IPv4 and

IPv6 network settings (e.g., IP address, subnet mask, default gateway address and DNS

address) by default.

Note

If your network does not use DHCP, proceed to

Basic Network Settings

on page

You can view phone status via phone user interface or web user interface.

Available information of phone status includes:

Network status (e.g., IPv4 status, IPv6 status, IP mode and MAC address).

Phone status (e.g., device model, hardware version, firmware version, product ID,

MAC address and device certificate status: factory, installed and not installed).