YEALINK NETWORK TECHNOLOGY CO. LTD. T42G User Manual

Page of 103
 
 
Copyright
 
Copyright © 2013 YEALINK NETWORK TECHNOLOGY CO., LTD. 
Copyright © 2013 Yealink Network Technology CO., LTD. All rights reserved. No parts of this 
publication may be reproduced or transmitted in any form or by any means, electronic or 
mechanical, photocopying, recording, or otherwise, for any purpose, without the express 
written permission of Yealink Network Technology CO., LTD. Under the law, reproducing includes 
translating into another language or format. 
When this publication is made available on media, Yealink Network Technology CO., LTD. gives 
its consent to downloading and printing copies of the content provided in this file only for 
private use and not for redistribution. No parts of this publication may be subject to alteration, 
modification or commercial use. Yealink Network Technology CO., LTD. will not be liable for any 
damages arising from use of an illegally modified or altered publication. 
Warranty 
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE SUBJECT 
TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN 
THIS GUIDE ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY 
KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF 
PRODUCTS. 
YEALINK NETWORK TECHNOLOGY CO., LTD. MAKES NO WARRANTY OF ANY KIND WITH REGARD 
TO THIS GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE. Yealink Network Technology CO., LTD. shall not be 
liable for errors contained herein nor for incidental or consequential damages in connection 
with the furnishing, performance, or use of this guide. 
 
Any Changes or modifications not expressly approved by the party responsible for compliance 
could void the user's    authority to operate the equipment. 
This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must 
accept any interference received, including    interference that may cause undesired 
operation. 
Note: This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to    part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in  a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed   
and used in accordance with the instructions, may cause harmful interference to radio 
communications. However,    there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful    interference to radio or 
television reception, which can be determined by turning the equipment off and on, the