Radeum Inc. FA04 User Manual

Congratulations, and thank you for 

choosing FreeLinc products to enhance 

your two-way radio communications. 

Each FreeLinc Adapter is compatible with 

other FreeLinc wireless communication

accessories that use cutting-edge Near 

Field Magnetic Induction communication 

(NFMI) wireless technology. NFMI supports 

mobility, freedom-of-motion, exceptional 

battery life, audio integrity, ease-of-use, 

durability, secure communications and 

comfort. This is the first technology of its 

kind to be implemented into practical voice 

and audio solutions for two-way radios.
Thank you for choosing FreeLinc. 

Anthony J. Sutera

CEO

Illustrated below are the components of 

your FreeLinc Adapter.

Attach your FreeLinc FA04 Adapter to the 

accessory interface of your portable radio 

(see your portable radio’s user manual if 

you need assistance locating the accessory 

interface). Use the thumb screw to secure 

the adapter to your radio (see diagram). 

When properly attached, the spring-loaded 

pins should align with the contacts on the 

accessory interface of your portable radio 

and the adapter should fit securely.

Note:  Do not overtighten the thumb screw.

The indicator light on your FreeLinc FA04 

Adapter indicates wireless communication 

status as follows:

Green Flashing

Link Active

Red Flashing

Seek Mode

Orange Flashing 

Vox Mode

 Not 

Illuminated

Sleep Mode

For up-to-date troubleshooting

information, please visit www.freelinc.com 

and click the “support” link. To contact a 

customer service representative, call

1-866-467-1199.

Turn on your portable radio and set the 

toggle switch to “ON” (see diagram).

This will automatically silence the speaker 

on your portable radio and route all of your

communications to the FreeLinc wireless 

accessory.

Note: For information on how to operate 

this product with a FreeLinc accessory, 

please refer to your user manual that came 

with the accessory.

Caution: To reduce the risk of fire or injury 

to persons, read and follow these

instructions.

Do not use liquid cleaners or aerosol

cleaners as they may damage the adapter 

or finish of the adapter. Use a dry cloth to 

clean the external portions of the adapter.

Do not stick anything inside the product as 

this may damage internal components. This 

product conforms to the following safety 

standards:

ANSI/UL 60950-1 1st Ed.

CAN/CSA C22.2 No. 60950-1-03

EN 60950-1 1st Ed.