Sanford MimioTeach Power Supply 1771376 Leaflet

Product codes
1771376
Page of 2
Package Contents 
MimioTeach bar with embedded wireless interface, rechargeable stylus, MimioHub wireless receiver, USB micro-B cable, magnetic 
mounting bracket, 5V 1.2A USB power supply, 1 DVD containing MimioStudio software.
Minimum Software 
Requirements 
MimioStudio 7 and higher on a 
Windows, Mac, or Linux OS.
For specific system 
requirements, please visit us at: 
mimio.com/support/downloads
Computer Interface 
USB (USB 2.0 compliant). 
USB Cable—“micro-B” USB 
connector. MimioHub will 
connect via USB to the PC. 
Data Transfer Rate—USB 
Full-speed USB (12 Mbps).
Power Consumption 
5V - 100mA DC via micro-USB
MimioTeach Bar Dimensions 
375.4 mm H x 68 mm W x 38 
mm D (14.8 in. H x 2.7 in. W x 
1.5 in. D)
Weight 
Bar: 305 g (10.75 oz)  
Stylus: 30 g (1 oz)  
Bar and Stylus: 335 g (11.82 oz)
Whiteboard Active Area  
(per device) 
Interactive mode with projector 
supports 1.5 m x 2.4 m (5 ft x 8 
ft), up to 2.5 m (8.3 ft) standard 
aspect-ratio diagonal projection 
display, and 2.9 m (9.4 ft) 
diagonal in wide-screen mode.
Stylus  
Ergonomically elegant stylus 
for interactive use. Ultrasound 
at 40 kHz (frequency) + Infrared 
at 940 nm (wavelength). 
Uses single 3.7 V Lithium-Ion 
rechargeable cell with 70 mAh 
capacity. Stylus recharges when 
docked in cradle on left side of 
MimioTeach. Retains a charge 
for 8-10 hours.  
Full recharge in 3 hours. 
60-second safety shut-off. 
Two buttons on the stylus 
activate functions: Right Click 
and MimioStudio Tools. 
Solid Teflon stylus with 
replaceable tip ensures ultra-
smooth action on all board or 
screen surfaces.
Resolution & Tracking Speed 
Signal tracking frequency 
87 times per second. Signal 
tracking speed 2.7 m (9 ft) per 
second. 4,800 x 9,600 line 
effective resolution on 1.2 m x 
2.4 m (4 ft x 8 ft) board. 
Positioning 
MimioTeach bar should be 
mounted in the center of the left 
side of the whiteboard in a location 
outside the projection area. 
Sensors must face a projected 
surface that is within the maximum 
Active Area range of the device. 
Minimum 3 inch gap between 
edge of projected image and edge 
of MimioTeach bar.
Controls & Indicators  
2 push-button functions on the 
MimioTeach bar: Interactive 
mode and Calibrate/Re-
calibrate. 1 Indicator: Link.
Specifications
Specifications
Temperature 
Operating:16°C to 38°C (60°F to 
100°F). (Higher than 80°F/27°C 
will cause slight inaccuracy for 
ink capture). Storage: -20°C 
to 35°C (-4°F to 95°F.) (1 year 
set by battery) -20°C to 45°C 
(-4°F to 113°F). (1 month set by 
battery) -30°C to 60°C (-22°F to 
140°F). (Absolute Maximum)
Humidity 
Operating: 15% to 75% non-
condensing. Storage: 0% to 
90% non-condensing.
Wireless Connectivity 
Enables a dedicated 2.4 GHz 
bidirectional point-to-point 
wireless connection to the 
computer through MimioHub, 
a USB “thumb drive” receiver 
with maximum range of 9 m (30 
ft). Does not require Bluetooth, 
special card, wireless networks, 
or wireless PC. MimioHub is a 
standard USB device using HID 
drivers, and comes paired with 
MimioTeach. MimioHub can be 
stored in the back slot of the 
MimioTeach bar when not  
in use.
Wireless Data Transfer Rate 
250 Kbps
Certification & Compliance 
Wireless: FCC, IC, CE, C-Tick, 
COFETEL, SCRF, SRMC, 
TELEC, RRL, TRA, ANRT, 
ANATEL, WPC, DGPT, CTI, 
MIC, SIRIM, MOC, CNC, 
SUBTEL, CRT, SUTEL, BURTEL, 
CONATEL, SIGET, SIT, PUC, 
TELCOR, ERSP, OSIPTEL, TATT, 
URSEC, UrkSEPRO, ICASA, 
NTRA, CITC, NCC. Safety: UL/
CSA/EN/IEC 60950-1 (CE & 
TUV NRTL) C-Tick, NOM, KCC, 
GOST, ANATEL, SII, UrkSEPRO, 
NCRS, VoC, CQC. EMC: FCC, 
IC, CE, C-Tick, GOST, KCC, 
ANATEL, SII. Environmental: 
RoHS, WEEE, REACH compliant.
International Use 
Computer USB or batteries 
as primary power source 
enable “Start up and Go” in 
any country. International AC 
Adapter for AC-powered use. 
Product Warranty 
Mimio hardware is warranted for 
2 years from date of purchase, 
with an additional 3 years with 
product registration at mimio.
com/warranty, for a total of 5 
years. MimioStudio software is 
supplied with a limited lifetime 
warranty, expiring 1 year after 
discontinuation of the product. 
Other Accessories Available 
USB extension cable, metallic 
mounting brackets w/removable 
adhesive strips for non-metallic 
surfaces, stylus, replaceable 
Lithium-Ion battery for  stylus, 
global AC adapters.
To learn more, visit mimio.com/mimioteach or call 877.MY.MIMIO.
© 2012 Mimio, a Newell Rubbermaid company