TP-Link Technologies Co. Ltd. TDW8950ND User Manual

The Router's ports, where the cables are connected, and RESET button are located on the back 
panel. 

 

Figure 1-2 

¾

  LINE: Connect to the Modem Port of Splitter or to the telephone line. 

¾

  Reset: There are two ways to reset the Router's factory defaults. 

1)  Use the Restore Default function on Management -> Settings -> Restore Default page in the 

router's Web-based Utility. 

2)  Use the Factory Default RESET button: With the Router powered on, use a pin to press and 

hold the RESET button for at least 5 seconds. And the Router will reboot to its factory default 
settings. 

¾

  POWER: The Power plug is where you will connect the power adapter. 

¾

  ON/OFF: The switch for the power. 

¾

  1, 2, 3, 4 (LAN): The ports (1, 2, 3, 4) connect the Router to the local PC(s). 

¾

  Wireless Antennas: To receive and transmit the wireless data. 

5