HP 511885-B31 User Manual
4.
Remove the display assembly (2).
NOTE:
Steps 5 through 22 provide display assembly internal component removal information for
computer models equipped with AntiGlare display assemblies. See steps 23 through 33 for display
assembly internal component removal information for computer models equipped with BrightView
display assemblies.
assembly internal component removal information for computer models equipped with BrightView
display assemblies.
NOTE:
See
for webcam/microphone module
replacement instructions for computer models equipped with BrightView display assemblies.
5.
If it is necessary to replace the display enclosure or any of the display assembly internal
components, remove the following screw covers and screws:
components, remove the following screw covers and screws:
a.
(1) Four rubber screw covers on the display bezel bottom edge. The display rubber screw
covers are included in the Display Rubber Kit, spare part number 513479-001 (15.6-inch
displays) or 512361-001 (16.0-inch displays).
covers are included in the Display Rubber Kit, spare part number 513479-001 (15.6-inch
displays) or 512361-001 (16.0-inch displays).
b.
(2) Four Phillips PM2.5×5.0 screws.
6.
Turn the display assembly upside down, with the bottom edge toward you.
7.
Release the display enclosure by sliding the enclosure (1) toward the top of the display assembly.
8.
Lift the display enclosure (2) as far as the display logo cable allows.
Component replacement procedures
83