TP-Link Technologies Co. Ltd. WR841NV13 User Manual

38

Chapter 4

Configure

For example

, the personal website has been built in my home 

PC (192.168.0.100). I hope that my friends on the Internet can 
visit my website in some way. My PC is connected to the router 
with the WAN IP address 218.18.232.154.

Router 

WAN: 218.18.232.154

LAN

Home

Personal Website 

1.  Set your PC to a static IP address, for example 192.168.0.100.

2.  Visit 

http://tplinkwifi.net

, and log in with the username and 

password you set for the router.

3.  Go to 

Forwarding

 > 

Virtual Servers

.

4.  Click 

Add New

. Select 

HTTP

 from the 

Common Service 

Port 

list. The service port, internal port and protocol will be 

automatically filled in. Enter the PC’s IP address 192.168.0.100 
in the 

IP Address

 field.

5.  Leave the status as 

Enabled

 and click 

Save

.

•  It is recommended to keep the default settings of 

Internal Port

 and 

Protocol

 if 

you are not clear about which port and protocol to use.

•  If the service you want to use is not in the 

Common Service Port

 list, you can enter 

the corresponding parameters manually. You should verify the port number that 

the service needs.

•  You can add multiple virtual server rules if you want to provide several services in 

a router. Please note that the 

Service Port

 should not be overlapped.

Users on the Internet can enter 

http:// WAN IP

 (in this example: 

http:// 218.18.232.154) to visit your personal website.

•  If you have changed the default 

Service Port

, you should use 

http:// WAN IP: 

Service Port

 to visit the website.

•  Some specific service ports are forbidden by the ISP, if you fail to visit the website, 

please use another service port.