Nolan Systems Inc. NSRX3C2XXX User Manual
GETTING STARTED
Remove all components from the package. Items in the pack
include: – Bluetooth stereo receiver, User Guide. Please check
the contents carefully and contact your local dealer immediately if
there are any shortages.
include: – Bluetooth stereo receiver, User Guide. Please check
the contents carefully and contact your local dealer immediately if
there are any shortages.
GETTING TO KNOW YOUR Stereo Receiver
This Bluetooth Stereo receiver (Rx) offers the latest innovation in
Bluetooth technology. It listen the music from a Bluetooth Stereo
Transmitter and talks on a Bluetooth equipped mobile phone
automatically when the phone call in. With the Rx, you will never
miss any call while enjoying your music wirelessly.
Bluetooth technology. It listen the music from a Bluetooth Stereo
Transmitter and talks on a Bluetooth equipped mobile phone
automatically when the phone call in. With the Rx, you will never
miss any call while enjoying your music wirelessly.
CHARGING THE RX
Before using the Rx, you must charge it for approximately two
hours. When fully charged, the battery provides up to 5 hours of
music play/talk time and up to 100 hours of standby time
hours. When fully charged, the battery provides up to 5 hours of
music play/talk time and up to 100 hours of standby time
Please note talk time is also a function of the mobile phone
and factory determined settings of the phone so you may
find this figure is reduced under certain conditions.
and factory determined settings of the phone so you may
find this figure is reduced under certain conditions.
To Charge the Rx
1.
Plug the USB charging cable into Rx mini USB holder.
2.
Plug the other side of the USB charging cable into a
powered USB holder. When charging, the LED will lighted
powered USB holder. When charging, the LED will lighted
3.
Unplug the USB charging cable from Rx when charging
finished, the LED will turn off
finished, the LED will turn off
PAIR RX USING HSF PROFILE
Pairing is the process of linking the Rx with your Bluetooth
mobile phone. Before you use the Rx with your mobile phone,
you must pair both devices. After pairing completed, you can
use the Rx only with the paired mobile phone. If you wish to
use with a different mobile phone, you must redo the pairing
process with the new Bluetooth mobile phone. In this case,
mobile phone. Before you use the Rx with your mobile phone,
you must pair both devices. After pairing completed, you can
use the Rx only with the paired mobile phone. If you wish to
use with a different mobile phone, you must redo the pairing
process with the new Bluetooth mobile phone. In this case,
the Rx will no longer work with the previous mobile phone.
Before you commence pairing the headset, ensure that the
battery is fully charged.
To pair the device
1.
Before you commence pairing the headset, ensure that the
battery is fully charged.
To pair the device
1.
Turn on the Rx (refer to the turn on / off Rx section), and
the Rx will go into pairing mode automatically.
the Rx will go into pairing mode automatically.
2.
The LED will blink in fast speed in paring stage.
3.
Turn on the mobile phone and place it within 10 feet to
the Rx.
the Rx.
4.
Initiate the mobile discovery feature on the mobile
phone. Refer to the mobile user guide for initiate this
feature.
phone. Refer to the mobile user guide for initiate this
feature.
5.
The Rx’s Bluetooth name is “Rx_HSF”
6.
Enter the default pin code “0000”, when the mobile
phone system is request for password.
phone system is request for password.
7.
When pair up with the mobile device, the LED will blink
in a regular interval (middle speed)
in a regular interval (middle speed)
Note: The Rx, in normal operation, should maintain the
connection with the mobile phone at all times once the pairing
mode and connection has been established between the two
devices.
connection with the mobile phone at all times once the pairing
mode and connection has been established between the two
devices.
PAIR RX USING AV PROFILE with Bluetooth Audio/Music
devices
devices
Pairing process is required before making connection with
Bluetooth Audio device such as audio transmitter, USB dongle
and notebook devices
To pair the AV device
1.
Bluetooth Audio device such as audio transmitter, USB dongle
and notebook devices
To pair the AV device
1.
Make sure your device is support Bluetooth AV profile.
(For PC or Notebook has been installed Bluetooth driver
which support AV profile.)
(For PC or Notebook has been installed Bluetooth driver
which support AV profile.)
2.
Turn on the Rx (refer to the turn on / off Rx section), and
the Rx will go into pairing mode automatically.
the Rx will go into pairing mode automatically.
3.
The LED will blink in fast speed during paring stage, and
place the Rx within 10 feet to the Audio devices.
place the Rx within 10 feet to the Audio devices.
4.
Initiate the AV supported device discovery feature.
Refer to the Device user guide for initiate this feature.
Refer to the Device user guide for initiate this feature.
5.
The Rx’s Bluetooth name is “Rx_HSF”.
6.
Enter the default pin code “0000”, when the Bluetooth
Audio device is requested for password.
Audio device is requested for password.
7.
When paired up with the BT audio devices, the LED will
blink in a regular interval (middle speed)
blink in a regular interval (middle speed)
Note: For some Embedded Bluetooth audio transmitter, the
pin code is fixed in the firmware, the user doesn’t need to
enter this pin code.
pin code is fixed in the firmware, the user doesn’t need to
enter this pin code.
Tips - If you want to use the Rx with your mobile phone and
Bluetooth audio device concurrently, you should pair the Rx
both with these two devices. Please make sure the other
one’s Bluetooth is turned off whenever pair with one device,
Bluetooth audio device concurrently, you should pair the Rx
both with these two devices. Please make sure the other
one’s Bluetooth is turned off whenever pair with one device,
If disconnection or lost link occurs, it may be due to the
following reason
following reason
The range is over 10 feet between both Rx and
the mobile phone (or Bluetooth audio device).
the mobile phone (or Bluetooth audio device).
Mobile phone (or Bluetooth audio device)
disconnected the link to conserve power or enable
disconnected the link to conserve power or enable
Bluetooth Wireless
Stereo Receiver
Rx
P/N NSRX3C2XXX
USER GUIDE
Declaration of Conformity. We declare that product
NSRX3C2XXX conforms to the R&TTE Directive 1999/5/RC .
NSRX3C2XXX conforms to the R&TTE Directive 1999/5/RC .
FCC ID:
Mini USB
holder
Audio
jack
LED
Talk
button