Gigaset Communications GmbH SX682 User Manual
13
Installing the Gigaset SX682 WiMAX
Gigaset SX682 WiMAX / engbt / A31008-N921-R101-2x-7619 / Installation.fm / 27.3.08
Sc
hablone 2
007_
10_1
9
Installing the Gigaset SX682 WiMAX
If you use the separate outdoor antenna (optional, not included in the scope of
delivery):
The Gigaset SX682 WiMAX can only be used with the device's integrated antenna or
with one of the following outdoor antennas.
delivery):
The Gigaset SX682 WiMAX can only be used with the device's integrated antenna or
with one of the following outdoor antennas.
This user guide assumes that installation of the outdoor antenna has been completed.
Choosing your location
u
Choose a location that enables you to simply set up the following connections with-
out any further work.
– Connect the Ethernet cable for connection to a PC or network.
– Connect the power lead to the mains socket.
out any further work.
– Connect the Ethernet cable for connection to a PC or network.
– Connect the power lead to the mains socket.
u
Stand the Gigaset SX682 WiMAX upright on an even, non-slip surface.
u
Lay the cables in such a way that nobody can tread on or trip over them.
u
Position the Gigaset SX682 WiMAX so that you can see the LEDs.
u
Do not cover the openings in the Gigaset SX682 WiMAX housing to ensure the heat
can circulate; otherwise, the duty cycle of the device will be reduced or the Gigaset
SX682 WiMAX switched off to avoid overheating.
can circulate; otherwise, the duty cycle of the device will be reduced or the Gigaset
SX682 WiMAX switched off to avoid overheating.
u
Do not operate the Gigaset SX682 WiMAX under the influence of direct heat sources
(e.g. directly in the sun).
(e.g. directly in the sun).
3,5 GHz
18 dBi WiMAX
Antenna
Outdoor
C39453-Z5-C504 A5B00076092365
3,5 GHz
9 dBi WiMAX
Antenna
Outdoor
C39453-Z5-C505 A5B00076093200
2,6 GHz
9 dBi WiMAX
Antenna
Outdoor
C39453-Z5-C506 A5B00076093231
2,6 GHz
15 dBi WiMAX
Antenna
Outdoor
C39453-Z5-C507 A5B00076093596
W
3.5 GHz versions should be used for the European Economic Area.
The following requirements apply:
All the external antennas used for this product must undergo a confor-
mity assessment procedure.
The 3.5 GHz antennas listed here meet the European requirements and
guarantee the functionality of the complete system.
During the conformity assessment procedure it was ensured that the SAR
limits set down in directive 99/519/EC are observed. Verification was per-
formed using EN 50385.
The Siemens outdoor antenna must be installed and put into service by a
qualified electrician.
The notes in the enclosed installation instructions must be followed
The following requirements apply:
All the external antennas used for this product must undergo a confor-
mity assessment procedure.
The 3.5 GHz antennas listed here meet the European requirements and
guarantee the functionality of the complete system.
During the conformity assessment procedure it was ensured that the SAR
limits set down in directive 99/519/EC are observed. Verification was per-
formed using EN 50385.
The Siemens outdoor antenna must be installed and put into service by a
qualified electrician.
The notes in the enclosed installation instructions must be followed