Kodak 1158153 User Manual

Page of 52
18 
 
A-61403  February 2012
 
Module/Separation Roller Guidelines for the i600/i700/i1800/i4000/i5000 Series Scanners Consumable Kits 
The following table provides a guideline of how often to change the feed module, separation roller, pre-separation 
pad and tires. Extra tires are provided in the event one is damaged during replacement. 
•  Feed module and separation roller tires: tire life will vary depending upon paper types, environment and 
cleanliness. Nominal tire life is approximately 500,000 pages; results will vary. Degradation of feeder 
performance, multiple feeds, stoppages, etc. indicate a need to change tires. Change all tires on the feed 
module and separation roller at the same time.   
•  Feed module and separation roller kit: it is recommended that you install a new feed module and separation 
roller approximately every 7
th
 tire change. Install a new feed module and separation roller at the same time. 
•  Pre-separation pad: change each time you change the feed module, separation roller or change the tires. 
NOTE:  The replacement tires are for use with the feed module and the separation roller (unless using the Kodak 
Feeder Kit for Ultra-Lightweight Paper. 
 
 
Description 
 
Feeder 
Consumables Kit  
 
Extra Large Feeder 
Consumables Kit  
Extra Extra  
Large Feeder 
Consumables Kit  
 
Feeder Kit for Ultra-
lightweight Paper  
CAT No. 108 4755 / 
832 7538 
CAT No. 842 6157 / 
838 7938 
CAT No.134 3680/ 
146 2415 
CAT No. 896 5279/ 
844 5280 
Feed Modules (4 tires) 
10 
Separation Rollers (2 tires) 
10 
Pre-Separation Pads 
18 
76 
154 
Replacement Tires 
50 
200 
400 
N/A 
Replacement Tires for 
Feed Module 
N/A N/A N/A  17 
Replacement Tires for 
Separation Roller 
N/A N/A N/A  10 
Expected scans / kit 
3,500,000 
17,500,000 
38,500,000 
2,400,000