Impinj Inc. IPJR640 User Manual
Speedway Revolution Installation and Operations Guide Octane 4.4
Chapter 2: Installing and Connecting
Copyright © 2010, Impinj, Inc.
13
7. Select Open. The Rshell console window opens.
8. Press Enter. The Rshell login prompt appears.
8. Press Enter. The Rshell login prompt appears.
Figure 2.6 COM1 Putty Login Prompt
9. Log in with the following default credentials unless you customized them:
User Name: root
Password: impinj
Password: impinj
10. When the Rshell command line prompt appears, begin configuring the
network settings for the reader. See “
Using Rshell to Configure Network
Settings
for Speedway Revolution” on page 14 for details.
11. When you have completed configuration of the appropriate network
settings,
connect the reader to your Ethernet
network as described on
page 11.
Note
: If you decide to connect to DHCP after connecting serially, remember to
use Rshell to change the IP address on the reader from static to dynamic. See
“
“
Using Rshell to Configure Network Settings
for Speedway Revolution” on page
15 for details.
Step 5: Test the Installed Reader
Confirm connections and functionality is correct by reading tags. Using the
MultiReader, a Windows PC test application from Impinj, you can quickly verify
reader operation by configuring various reader parameters and running simple
inventory operations. For details about how to access and
MultiReader, a Windows PC test application from Impinj, you can quickly verify
reader operation by configuring various reader parameters and running simple
inventory operations. For details about how to access and
use MultiReader
, see
page 15.