Impinj Inc. XARRAY User Manual
Speedway Revolution Installation and Operations Guide Octane 4.11
Chapter 2: Installing and Connecting
Revision 4.11 Copyright © 2014, Impinj, Inc.
15
Figure 2.7 COM1 Putty Login Prompt
9. Log in with the following default credentials unless you customized them:
user name: root
password: impinj
password: impinj
10. When the RShell command line prompt displays, begin configuring the network
Speedway Revolution on page 17 for details.
11. When you have completed configuration of the appropriate network settings,
network as described on page 13.
Note
: If you decide to connect to DHCP after connecting serially, remember to use
for Speedway Revolution on page 17 for details.
Step 5: Configure the Region Setting on the Reader
GX1 or GX2 Reader models that support multiple countries required that the professional
installer set the specific region of operation. Note FCC or ETSI Readers cannot be altered
and only operate per the regulatory laws in USA/Canada, or European Union.
installer set the specific region of operation. Note FCC or ETSI Readers cannot be altered
and only operate per the regulatory laws in USA/Canada, or European Union.
Warning:
The RF settings must match
the country/region of operating to comply
with local laws and regulations. You, the
user, are responsible to ensure operation
with the correct RF settings and are solely
responsible for any fines and other damages
due to incorrect or non-compliant
country/region settings on your Reader.
with local laws and regulations. You, the
user, are responsible to ensure operation
with the correct RF settings and are solely
responsible for any fines and other damages
due to incorrect or non-compliant
country/region settings on your Reader.
Avertissement
: Les paramètres RF
doivent correspondre au pays / région
d'exploitation se conformer aux lois et
règlements locaux. Vous, l'utilisateur, sont
chargés d'assurer le fonctionnement avec les
paramètres RF correctes et sont seuls
responsables de toutes les amendes et
autres dommages imputables à des
manipulations ou les paramètres de pays /
région non-conformes sur votre lecteur.
d'exploitation se conformer aux lois et
règlements locaux. Vous, l'utilisateur, sont
chargés d'assurer le fonctionnement avec les
paramètres RF correctes et sont seuls
responsables de toutes les amendes et
autres dommages imputables à des
manipulations ou les paramètres de pays /
région non-conformes sur votre lecteur.
Out of the box, GX1 and GX2 Readers have no region configured (null region) and will not
transmit RFID signals. The region can be selected and set using the Reader‘s http interface
(web browser) or using RShell. The procedure to set region via web interface is as follows:
transmit RFID signals. The region can be selected and set using the Reader‘s http interface
(web browser) or using RShell. The procedure to set region via web interface is as follows:
1. Connect to the Reader using a web browser http://<reader name or IP address>.
Examples: http://speedwayr-10-00-DD or http://10.0.10.44.