Impinj Inc. XARRAY User Manual
Speedway Revolution Installation and Operations Guide Octane 4.11
Chapter 3: Configuring and Monitoring
Revision 4.11 Copyright © 2014, Impinj, Inc.
19
This section covers connecting to and configuring a Reader‘s RF parameters using
MultiReader. It also provides a high-level description of each parameter.
MultiReader. It also provides a high-level description of each parameter.
To configure and test a Reader from within MultiReader:
1. Install and launch the MultiReader application. The following screen displays:
Figure 3.1 MultiReader initial screen
2. Select Configure Settings. The Reader Settings screen displays:
Figure 3.2 MultiReader Reader Settings Connection Screen
3. Connect to the Reader by typing the Reader‘s IP address or hostname in the Name
or IP Address field.