Impinj Inc. XARRAY User Manual
Speedway Revolution Installation and Operations Guide Octane 4.11
Appendix A: Regions of Operation
Appendix A: Regions of Operation
36
Revision 4.11 Copyright ©2014, Impinj, Inc.
maximum conducted power allowance of 30 dBm at the antenna connector. The maximum
allowable output power of the Reader can be set to satisfy both the conductor and radiated
maximum criteria. The expression for the maximum Reader power setting is:
allowable output power of the Reader can be set to satisfy both the conductor and radiated
maximum criteria. The expression for the maximum Reader power setting is:
Maximum power setting (in dBm) = the Smaller of:
(36 – Composite Antenna Gain (in dBm))
OR (30 + Cable Loss (in dBm))
where the composite antenna gain comprises the maximum linear antenna gain in dBi
minus any cable loss between the Reader and antenna in dB. Approved antenna vendors,
model numbers, and associated gain are listed in the next section.
minus any cable loss between the Reader and antenna in dB. Approved antenna vendors,
model numbers, and associated gain are listed in the next section.
Note
:
The composite antenna gain comprises the maximum linear antenna gain in dBi
minus any cable loss between the Reader and antenna in dB. Approved antenna vendors,
model numbers, and associated gain are listed in the next section.
model numbers, and associated gain are listed in the next section.
Approved Antennas
Laird Technologies model number S9028PCL/R (left- or right-hand CP), with
integrated 8 foot pigtail to RP-TNC male connector; 6 dBi composite gain
integrated 8 foot pigtail to RP-TNC male connector; 6 dBi composite gain
Impinj model number IPJ-A0301-USA (Mini-Guardrail) with SMA female connector; -
15 dBi gain
15 dBi gain
Impinj model number IPJ-A0310-USA Threshold Antennas (IPJ-A0311-USA and IPJ-
A0311-EU1) with 12 inch integrated pigtail to BNC male connector, 6 dBi composite
gain.
A0311-EU1) with 12 inch integrated pigtail to BNC male connector, 6 dBi composite
gain.
Impinj model number IPJ-A0400-USA, CSL CS-777-2 (Brickyard) with 7 foot
integrated pigtail to RP-TNC male connector; 2 dBi composite gain
integrated pigtail to RP-TNC male connector; 2 dBi composite gain
Impinj model number IPJ-A0401-USA or IPJ-A0402-USA (both Guardwall) with 6 foot
integrated pigtail to RP-TNC male connector; 6 dBi composite gain
integrated pigtail to RP-TNC male connector; 6 dBi composite gain
Impinj model number IPJ-A0404-000, Matchbox antenna with 20cm integrated
pigtall to SMA connector; -20 dBi composite gain.
pigtall to SMA connector; -20 dBi composite gain.
MA/COM MAAN-000246-FL1 integrated RFID floor-mounted stand (multiple
configurations available, 2 or 4 antennas left-hand and right-hand CP) with 8 foot
integrated pigtail to RP-TNC male connector; 6 dBi composite gain
configurations available, 2 or 4 antennas left-hand and right-hand CP) with 8 foot
integrated pigtail to RP-TNC male connector; 6 dBi composite gain
MA/COM MAAN-000246-WL1 integrated RFID wall-mounted stand (multiple
configurations available, 2 antennas left-hand and right-hand CP) with 8 foot
integrated pigtail to RP-TNC male connector; 6 dBi composite gain
configurations available, 2 antennas left-hand and right-hand CP) with 8 foot
integrated pigtail to RP-TNC male connector; 6 dBi composite gain
MTI MT-262006/TLH (left-hand CP) or MT-262006/TRH (right-hand CP) with RPTNC
female connector (antennas available in IP54 or IP67 ratings); 6 dBi gain
female connector (antennas available in IP54 or IP67 ratings); 6 dBi gain
MTI MT-262013/NLH (left-hand CP) or MT-262013/NRH (right-hand CP) with Ntype
female connector (antennas available in IP54 or IP67 ratings); 4.5 dBi gain
female connector (antennas available in IP54 or IP67 ratings); 4.5 dBi gain
MTI MT-262013/TLH (left-hand CP) or MT-262013/TRH (right-hand CP) with RPTNC
female connector (antennas available in IP54 or IP67 ratings); 4.5 dBi gain
female connector (antennas available in IP54 or IP67 ratings); 4.5 dBi gain
Sensormatic Electronics Corp. model number IDANT20TNA25 with 25 foot Belden
7806A RG-58 coaxial cable (0.1 dB per foot loss) to RP-TNC male connector; 5.5 dBi
composite gain
7806A RG-58 coaxial cable (0.1 dB per foot loss) to RP-TNC male connector; 5.5 dBi
composite gain
Sensormatic Electronics Corp. model number IDANT10CNA25 with 25 foot Belden
7806A coaxial cable (0.1 dB per foot loss) to RP-TNC male connector; 3.5 dBi
composite gain
7806A coaxial cable (0.1 dB per foot loss) to RP-TNC male connector; 3.5 dBi
composite gain
Sensormatic Electronics Corp. model number IDANT10CNA25 with 6 foot Belden
7806A coaxial cable (0.1 dB per foot loss) to RP-TNC male connector; 5.4 dBi
composite gain
7806A coaxial cable (0.1 dB per foot loss) to RP-TNC male connector; 5.4 dBi
composite gain