Resolution Products Inc. RE214 User Manual

IN

STA

L

L

G

U I D E

is a fire-protection device 

that alarms when it detects smoke or 

temperatures above 135°F (57°C).

•  UL217 and ULC531 listings

•  Smoke and heat detection

•  5 year warranty

1.  Remove the mounting plate.
2.  Pull the battery tab.
3.  Restore the mounting plate and 

twist it fully onto the smoke alarm.
Note: Enrollment is possible only 

if the mounting plate is twisted 

onto the smoke alarm.

4.  Enroll Loop 1 of the smoke alarm 

by placing the panel into wireless 

enrollment mode and then hold 

down the smoke’s test button until 

the smoke alarm beeps. Release the 

test button until the sounder stops 

beeping, and then press and hold 

the test button again to enroll.

5.  Remove the mounting plate and 

refer to Sections 2 and 6 for 

positioning and installation.

6.  After mounting plate is installed 

restore the smoke alarm onto the 

mounting plate and fully test the 

smoke alarm per Section 7. 

detach the 

smoke alarm from its mounting plate 

and replace the batteries. 

 

Attention 

 

This manual should be read prior to use and retained for further information.

Verify proper enrollment and operation using your security panel’s installation manual.

Test Smoke Alarm

Pull Battery Tab

Position Smoke Alarm

12 inches

minimum

12 inches

minimum

RE214 Honeywell

®

 Compatible Smoke and Heat Alarm