Zebra P1031365-026 User Manual

23

QLn Series User Guide

AC Power Adapter (included in kit p/n P1031365-024)

Qln Series 

AC Adapter

 

DC Input

AC Power Cord 

(varies with 

geographic 
location)

 

•  Open the protective cover on the QLn Series printer to 

expose the DC input charger jack.

•  Connect the appropriate AC power cord for your location to the 

adapter and then plug the power cord into an AC receptacle.

•  Plug the barrel plug  from the P1029871 AC adapter into the 

charger jack on the printer.

•  The printer will power up and begin charging. The printer can 

be left on or turned off at this point. Charging will continue in ei-
ther state.

            Batteries are shipped uncharged. Remove protective shrink-wrap and 

labels from new battery packs and allow them to charge completely 

prior to initial use. 

            While it’s possible to charge the battery when using the printer, 

charge times will increase under this condition.

Figure 10: Charging the Battery Pack with the AC Power Adapter)