Zebra P1031365-026 User Manual

QLn Series User Guide

Loading Media in Peel-off Mode

• If you plan to use the printer in the peel-off mode, peel a few la-

bels off of the media and load the media as previously described.

• Push the peeler lever forward to release the peeler bail into the

“up” position as shown at “3” and “4” in Figure 13.

• Close the media cover to lock the peeler bail in place. The media

will feed between the peeler bail and platen.

Peeler Lever

Figure 13: Activating Peeler Bar

• Turn on the printer or press the Feed button on the front of the

printer if the printer is already on.

The printer will advance the media to the next label, if printing

labels. If you are printing on journal media, the printer will ad-
vance a short strip of media.

To disengage the peeler bail, first open the media cover as previ-

ously described. The peeler bail will automatically return to the
Up position.

Press straight down on the peeler bail to lock it in place in its origi-

nal home position.

Latch Release

Lever

Peeler Bail

Pull up and flip down if

using media in the peel-

off mode.