Novatel 01018300 User Manual

The name of the output file is the same as the input file when converting to ASCII or binary formats. 
The file extension, however, is altered to indicate the format of the data:

*.asc

 for ASCII

*.bin

 for binary

When converting to RINEX, the output files are named according to the RINEX Version 2.10 naming 
convention, see Section 4.3.1, Rinex Format on Page 44.

The -batch arguments suppress the window display and convert the specified file automatically.

 When converting to RINEX in batch mode, the navigation and observation file header 

information from the most recent interactive Convert4 session is used.

The receiver stores its program firmware in non-volatile memory, which allows you to perform 
firmware upgrades without having to return the receiver to the distributor. New firmware can be 
transferred to the receiver through COM1, and the unit will immediately be ready for operation at a 
higher level of performance.

The first step in upgrading your receiver is to contact your local NovAtel dealer. Your dealer will 
assist you in selecting the best upgrade option that suits your specific GPS needs. If your needs are 
still unresolved after seeing your dealer then you can contact NovAtel directly through any of the 
methods described in the Customer Service section, Page 16, at the beginning of this manual.

When you call, have your receiver model number, serial number, and program revision level 
available. This information can be found by issuing the LOG VERSION command at the port prompt.

After establishing which new model/revision level would best suit your needs, and having described 
the terms and conditions, you will be issued an authorization code (auth-code). The auth-code is 
required to unlock the new features according to your authorized upgrade model type.

To upgrade to a higher performance model at the same firmware revision level (for example, 
upgrading from a SMART-AG to a SMART-AG-ER on firmware version 3.600), you can use the 
AUTH command with the issued auth-code.

If you are upgrading to a higher firmware revision level (for example, upgrading a SMART-AG- PVT 
firmware version 3.600 to SMART-AG-RT-20 firmware version 3.700), you will need to transfer new 
program firmware to the OEMV family receiver using the WinLoad utility program. As WinLoad and 
the upgrade file are generally provided in a compressed file format, you will also be given a 
decompression password. WinLoad and the upgrade files can be found on NovAtel's FTP site at 

http:/

/www.novatel.com

, or can be sent to you by e-mail.

Your local NovAtel dealer will provide you with all the information that you require to upgrade your 
receiver.

The AUTH command is a special input command which authorizes the enabling or unlocking of the