King Controls 10157V10 User Manual
Vu Qube
V10_04
6
Installation
Overview of Installation
• The Vu Qube is designed to be mounted to a vehicle (Figure 1).
• It is recommended to install the Vu Qube with a minimum of 4” of the top cover above
the highest point of the cab or air shield (Figure 1) and away from interfering objects like
smoke stacks.
smoke stacks.
• The coaxial cable needs to enter the Cab to be connected to the satellite receiver.
Figure 2. Face connections for wiring towards the back of the cab.
Figure 1. It is recommended to have a minimum of 4” of the VuQube above the highest point on the cab, including the air shield.
It is also recommended to be as far away as possible from any object that may obstruct direct line of sight of the antenna to the
southern sky. Such interfering items may include air-conditioner units, logistic devices and brackets, beacons and smoke stacks.
It is also recommended to be as far away as possible from any object that may obstruct direct line of sight of the antenna to the
southern sky. Such interfering items may include air-conditioner units, logistic devices and brackets, beacons and smoke stacks.
Mounting Location
• Choose mounting position with least
amount of obstruction (i.e. away
from smoke stack).
from smoke stack).
• Make sure to have space to run
coaxial cable.
• Make sure when you run the wires
that there are not any sharp bends.
Be sure to mount with
minimum 4” above cab
minimum 4” above cab
Back of cab
Coaxial Cable connection
•
Face towards back of the cab.
•
Position on side you will run coaxial
cable.
cable.