Gefen EXT-COMPAUD-141 Leaflet

Page of 1
Extend Component Video and Audio.
Features:
Specifications:
Extends component video and audio up to 
1000 feet (300 meters) using one CAT-5e cable
Extend your audio and video signal using the 
Gefen Component Audio Extender. Place your 
source anywhere and extend the signal up to a 
1000 feet away. The Component Audio 
Extender will extend Analog Component video 
as well as Analog Audio or Digital Audio via 
SPDIF or TOSlink.  All audio is transmitted 
digitally over the CAT-5e cable and both the 
analog and digital audio outputs are active on 
the receiver side.
How it works
The Component Audio Extender sender unit 
connects to any Component video and audio 
source using the supplied Component and 2 
RCA audio cables. The receiver unit connects to 
your HDTV component video display and audio 
input up to 1000 feet away. One CAT-5e 
cable is used to connect the sender to receiver 
for perfect video extension up to 1080p. The 
sender and receiver both will be powered 
individually by 5V power supplies. Both analog 
and digital audio outputs are active on the 
receiver side when two channel audio is 
inputted.  If multi-channel audio is inputted then 
the analog audio output will not work.  
Gefen Inc.
20600 Nordhoff Street, Chatsworth, CA 91311
Tel. (818) 772-9100   (800) 545-6900   Fax (818) 772-9120
www.gefen.com
EXT-COMPAUD-141
Video Amplifier Bandwidth: 350 MHz 
Input Video Signal: 1.2 Volts p-p 
Input Sync Signal: 5 Volts p-p (TTL) 
Horizontal Frequency Range: 15-70 KHz 
Vertical Frequency Range: 30-170 Hz 
Video In/Out: 3 RCA component 
Audio In/Out: 2 RCA Audio, 1 SPDIF, 1 TOSlink
Link Connector: RJ-45 Shielded
Power Supply: 5V DC
Power Consumption: 5 watts (max.)
Dimensions: 3"W x 1"H x 3.75"D
Shipping Weight: 3 lbs. 
Supports up to 1080p component video
Supports analog L+R audio and multichannel digital Toslink or SPDIF audio
No Loss of Quality
Plug and play installation
Equalizations for different CAT-5 skews
One CAT-5 cable for extension