BandRich Inc. R250 User Manual
WiFi Setup
26
RADIUS Server: Enter the IP Address of the RADIUS server.
RADIUS Port: Enter the port number of the RADIUS server. The default
value is 1812.
value is 1812.
Shared Key: Enter the key shared between the Router and the server.
Key Renewal: Enter a key renewal value to tell the Router how often it
should change the encryption keys. The value must be between
60-99999.
should change the encryption keys. The value must be between
60-99999.
RADIUS
RADIUS stands for Remote Authentication Dial-In User Service. It is a
networking protocol that uses access servers to provide centralized
management of access to large networks.
networking protocol that uses access servers to provide centralized
management of access to large networks.
RADIUS Server:
Enter the IP Address of the RADIUS server.
RADIUS Port:
Enter the port number of the RADIUS server. The default value is
1812.
Shared Key:
Enter the key shared between the Router and the server.
Encryption:
Select either 64-bits or 128-bits from the drop-down list The 64-bits
encryption requires 10 hexadecimal digits. The 128-bits encryption requires 26
hexadecimal digits .You can set up to four different keys.
hexadecimal digits .You can set up to four different keys.
Passphrase:
Strings of hexadecimal characters are not easy to remember. This
conversion utility converts a simple word or phrase into hex, so that you can easily
remember and regenerate the pass-phrase.
remember and regenerate the pass-phrase.
TX Key:
You can specify which key you want to use for the WiFi network.