BandRich Inc. R250 User Manual
Package
Contents
5
7
Power Receptor
Receptor for the Power Adaptor.
8
UMTS LED
Reference below table.
9
Roaming LED
Solid light shows the Router is connecting to
Roaming network.
Roaming network.
10
WLAN LED
Solid light indicates that the wireless segment is
ready.
Flashing light shows that data is being
transmitted via WLAN.
ready.
Flashing light shows that data is being
transmitted via WLAN.
11
Ethernet LED
Solid light shows that an Ethernet-enabled
computer is connected via the LAN port but no
data is being transmitted.
Flashing light shows that data is being
transmitted via LAN.
computer is connected via the LAN port but no
data is being transmitted.
Flashing light shows that data is being
transmitted via LAN.
12
DIAG LED
Reference below table.
13
Power LED
Solid light indicates that the power supply is
connected properly.
connected properly.
14
3G Radio On/Off &
Signal Strength
Button
Signal Strength
Button
Short press – Enable Signal Strength indication
for 3 sec.
Long press (>5 sec) – 3G radio on/off
for 3 sec.
Long press (>5 sec) – 3G radio on/off
15
3G Radio Signal
Strength Indicator
Strength Indicator
Indicates the 3G signal strength when 3G Radio
button is in short press.
button is in short press.
Table for UMTS and DIAG LED:
Operation status
UMTS
DIAG
Error in Router
OFF
Solid
Fail to boot module
Solid Red
Flashing
No SIM exist
Flashing Red
OFF
Waiting for PIN entering Flashing
Red
OFF
No network/Searching for network Flashing
Red
OFF
3G camped
Flashing Green/Pink
OFF
3G connected
Solid Blue/Green/Pink
OFF
Note: Pink for UMTS LED is available by product if 2G is available.