BandRich Inc. R528 User Manual
Appendix A: FAQ
54
Appendix A: FAQ
Q: What does the Power LED indicate?
A: The Power LED with solid yellow indicates the Router is on.
Q: How to connect to the Router?
A: 1. Connect an Ethernet cable between the PC/NB and the Router.
2. Use WiFi to connect.
Q: What’s the default “User name” and “Password” for the Router?
A: Please refer to the Quick Start Guide included in the package.
Q: How to enter GUI?
A: 1. Connect PC/NB to the Router.
2. Open Internet Explorer or another Web browser.
3. Input “http://192.168.1.1” (default) or “http://R500.ROUTER”.
4. Input User name and Password.
5. Please refer to the Quick Start Guide included in the package.
Q: How to setup the configuration for the Router?
A: 1. Enter Wizard page to setup.
2. Enter each GUI page to setup.
Q: Why can’t I connect to the network via built-in LTE/3G module?
A: 1. Check if the SIM/USIM is inserted well.
A: Please refer to the Quick Start Guide included in the package.
Q: How to enter GUI?
A: 1. Connect PC/NB to the Router.
2. Open Internet Explorer or another Web browser.
3. Input “http://192.168.1.1” (default) or “http://R500.ROUTER”.
4. Input User name and Password.
5. Please refer to the Quick Start Guide included in the package.
Q: How to setup the configuration for the Router?
A: 1. Enter Wizard page to setup.
2. Enter each GUI page to setup.
Q: Why can’t I connect to the network via built-in LTE/3G module?
A: 1. Check if the SIM/USIM is inserted well.
2. Check if the type of radio access technology on the screen if the
network is available.
3. Check the subscriber’s network operator on the screen if the ISP
name is available.
4. Check if the Status on GUI if the SIM/USIM is detected well.
5. Check if the Status on GUI if the APN it is correct.
5. Check if the Status on GUI if the APN it is correct.