BandRich Inc. E6001801 User Manual
Installation
9
Mounting the Unit
Mount LTE Advanced Outdoor CPE on a 1”-4” pole using the supplied kit,
or the optional tilt accessory.
or the optional tilt accessory.
Using the clamp
1. Thread the M10*100mm bolts through spring washers, flat washers and bracket
holes.
2. With the connectors facing downwards, attach the LTE Advanced Outdoor CPE
to a 1” to 4” pole.
3. Attach the bracket to the other side of the pole.
4. Thread the M10*100mm bolts through the holes the bracket and into the LTE
Advanced Outdoor CPE.
Ground the CPE
For safe outdoor use, use the grounding terminal to ground the CPE
housing before making any connections.
housing before making any connections.
You need the following:
Spring washer
M5x8 mm screw
NOTE
The spring washer and M4x8L screw are not included in your package.
The spring washer and M4x8L screw are not included in your package.