Sezmi Corporation U2RV User Manual
1055 Tierra Del Rey
Installation
PAGE:
3
OF
8
Chula Vista, CA91910
DATE:
1 Introduction
This document describes the installation of the module into the box. This document describes how Sezmi will control
installation/ manufacturing and labeling of the product. It will also show were the FCC statements will be added
to the final Manual.
installation/ manufacturing and labeling of the product. It will also show were the FCC statements will be added
to the final Manual.
2 Installation
The installation of the product is unique because the mounting mechanism is designed specifically for the product.
The mounting fixture has specific area in the PCB that is left empty for the clamps. Also the clamp has an unique
form factor. This implies that the board cannot be installed in other modules were it was never intended because of
the unique mounting mechanism.
The mounting fixture has specific area in the PCB that is left empty for the clamps. Also the clamp has an unique
form factor. This implies that the board cannot be installed in other modules were it was never intended because of
the unique mounting mechanism.
The following are the areas were the clamps can be latched on the PCB:
H:\lgateno\Customer\Building_B\FCC\RCVR\Eight\Installation_Instruction_10_24_08.doc