RLW Inc. RLW88844422 User Manual
Operation Quick Start Guide
5
1. WiTry™ System Components
The WiTry™ Kit provides the field application engineer with a portable
demonstration of the Bently Nevada™ Wireless Condition Monitoring system.
The WiTry Kit includes the following:
demonstration of the Bently Nevada™ Wireless Condition Monitoring system.
The WiTry Kit includes the following:
• Three (3) wSIM™ Processing/Communication Modules, each capable of
monitoring vibration and temperature at individual points
• One (1) wSIM™ Mesh Network Gateway pre-configured for the particular
WiTry™ kit (including power adapter and antenna)
• One (1) Ethernet cross-over cable to connect Mesh Network Gateway to
your System1®-equipped computer
• Three (3) Accelerometers and cables
• Three (3) Thermocouples, mounts, and cables
• One (1) 512 MB USB Memory Stick with required software and
configuration files
• One WiTry™ Kit Configuration Checklist Card
• One (1) CD-ROM with backup of required software and documentation
• Three (3) Spare batteries in enclosures
• One (1) Spare Parts Bin (empty)
• One (1) Operation Quick Start Guide (this document)
The following sections will describe the proper steps, in order, to most efficiently
set-up the system for the first time from your System1®-equipped computer.
After the system is set-up for the first time and software/files are installed and
configured, the system requires very little setup; the process is described in
set-up the system for the first time from your System1®-equipped computer.
After the system is set-up for the first time and software/files are installed and
configured, the system requires very little setup; the process is described in
Sections 3 and 4.
1.1 Unpacking the components
1.1.1 Processing/Communication Modules
Remove the three wSIM Processing/Communication Modules from the case.
Place them approximately 1m apart, oriented vertically (for best antenna
performance). The modules have magnets in the bottom for attachment to
ferrous surfaces.
performance). The modules have magnets in the bottom for attachment to
ferrous surfaces.