Avertronics INC. LCHC31200908 User Manual

zRS232 Wireless control_PC Software manual 

： 

 

1. Select “Receiver Number setting” Sheet。 

2. Turn ON the receiver switch which you want to setup，other receivers must turn 

OFF。 

3. Wait until RS232 is linking。 

4. Pull down the “Number setting” bar then choice the number which you would like 

to set。   

5. Push “Setting Key” The Message shows「Setting…」

， 

        When setting is error The Message shows「Setting error…」 

1. Select “Receiver Number setting” Sheet。 

2. Select field，the keyboard shows. 

3. Use keyboard input，Receiver’s MAC last four digit。 

        (ex：Receiver MAC：D_158d0000056707    --> Please input 6707)。