Ophir Optronics Ltd QSR User Manual
Chapter 1 – Introduction
CE Compliance – USBI, Pulsar and Quasar
Item Quasar
Specifications
Battery
3x AA size, 1.8 to 2.4Ah NiMH rechargeable battery built-in
Charger Input
DC 12 to 25v, 5W
Charge time approx 5-6 hours, automatically switches to
trickle charge when battery is full
trickle charge when battery is full
Operation between charges
~ 40 hours, thermopile and photodiode heads
~ 20 hours pyroelectric and PD Energy heads
~ 100 hours with no Bluetooth connection to PC
Bluetooth Specifications
Class 1 device
Working Range:
• Standard version: Up to ~30m
• Long range upgrade: Up to ~100m in open area
• Long range upgrade: Up to ~100m in open area
LED Indicator
No PC connection – slow flashing blue LED
Connection made to PC – long single flash of blue LED
Connected – fast flashing blue LED
Battery low (less than ~20% capacity) – LED flashes red
(For more details see Table C-1)
CE Compliance – USBI, Pulsar and Quasar
The system, as installed on a CE compliant PC, will comply with all pertinent
CE requirements relating to safety, sensitivity to interference, EMC and
emissions.
CE requirements relating to safety, sensitivity to interference, EMC and
emissions.
FCC Compliance - Quasar
The Quasar is fully compliant with all relevant requirements for radio
equipment: FCC (USA), CE (Europe), TELEC (Japan). The following section
contains information required by the FCC.
equipment: FCC (USA), CE (Europe), TELEC (Japan). The following section
contains information required by the FCC.
FCC ID: V6XQSR
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
following two conditions:
1. This device may not cause harmful interference and
2. This device must accept interference received, including interference that
may cause undesired operation.
StarLab User Guide
6