Ophir Optronics Ltd QSR User Manual
Chapter 2 – Installing StarLab
Installing Bluetooth USB Adapter software (for Quasar)
Installing Bluetooth USB Adapter software (for
Quasar)
Quasar)
In order to work with the Quasar device, in addition to the StarLab software, a
Bluetooth radio device must be installed on the PC. This radio device may be a
built-in radio inside the PC, as available on many laptops, or it may be an
external USB adapter as supplied with the Quasar. This section describes the
installation of the Bluetooth to USB adapter supplied with the Quasar.
Bluetooth radio device must be installed on the PC. This radio device may be a
built-in radio inside the PC, as available on many laptops, or it may be an
external USB adapter as supplied with the Quasar. This section describes the
installation of the Bluetooth to USB adapter supplied with the Quasar.
Note: The Quasar device and StarLab software are fully tested with the
Bluetooth adapter supplied by Ophir with the Quasar. While the
StarLab software is expected to function with any Bluetooth radio that
may be installed on the PC, for best results Ophir recommends using
only the radio adapter supplied with the Quasar.
StarLab software is expected to function with any Bluetooth radio that
may be installed on the PC, for best results Ophir recommends using
only the radio adapter supplied with the Quasar.
To view instructions for installing the Bluetooth USB Adapter software
1. Start your computer
2. Insert the Ophir CD into the CD-ROM drive.
3. The CD software should start automatically. If it does not, double-click
index.htm from the CD-ROM drive to start the software. The main CD
menu will appear.
menu will appear.
4. Under the main heading, click Quasar. The Quasar CD menu will appear.
Figure 2-8 Quasar CD menu
5. Click Install Bluetooth Adapter Software. Instructions for installing the
Bluetooth USB Adapter software will appear.
Connecting the Quasar device
After completing the StarLab software installation and the Bluetooth USB
Adapter software installation, you are ready to connect the Quasar device.
Adapter software installation, you are ready to connect the Quasar device.
Connecting the Quasar device
1. Connect the head to the head input on the device.
StarLab User Guide
13