Arcadian Networks Inc. V384 User Manual
6
www.arcadiannetworks.com
3 U
SING THE
M
ODEM
Follow the steps below to use the modem properly.
To use the modem:
1
Check that the computer with which you are using the V384 modem
contains a working Ethernet network card, and has the following software
installed and operational:
installed and operational:
•
Microsoft Windows 95 operating system or later
•
Access to the Internet
•
A standard Internet browser application
•
The Telnet communications utility
2
Attach your computer to the modem’s LAN port with the included RJ-45
Ethernet cable.
3
Connect the antenna cable to the RF connector on the rear of the
modem.
4
Install the antenna. Connect the antenna cable to the antenna.
5
Plug the 9-Volt modem power supply jack into the POWER socket on
the rear of the modem, and plug the power supply transformer unit into a
standard electrical wall outlet.
standard electrical wall outlet.
Note: As with any household electrical device, avoid the risk of accidental electrical shock.
Make sure that your hands are completely dry and that there is no moisture on the floor or
other surfaces in the immediate area of the electrical wall outlet.
Make sure that your hands are completely dry and that there is no moisture on the floor or
other surfaces in the immediate area of the electrical wall outlet.
After connecting the power adapter to the modem, verify that the three green
front panel LEDs light up for approximately 2 seconds before going out.
front panel LEDs light up for approximately 2 seconds before going out.
The orange POWER LED at the left of the front panel lights up and remains lit,
indicating that the modem is powered up.
indicating that the modem is powered up.
Note: Use 11.5 dBd gain antenna, Arcadian model 4RF0054-A, or equivalent
Hazard: As with any mobile transmitting equipment, avoid of getting the human body closer
than 20 Cm to the modem or the antenna.
than 20 Cm to the modem or the antenna.