Arcadian Networks Inc. V390I User Manual
V290iA User Guide
55
Issue
Actions
11. Check the Registration status by entering state.
12. The Registration status should display the following:
fRngSuccess = true, fLastRngRspStatus = 3,
fCmIpInitState = 2, fCmRegState = 2
.
If the values differ:
Check the modem provisioning settings (modem
configuration file setting) in the NMS. Refer to the NMS
User Guide for instructions.
configuration file setting) in the NMS. Refer to the NMS
User Guide for instructions.
Power Failure Indications Provided by the Power LED
The Power LED provides the following failure indications:
Green when power is supplied only to the V384+A.
Red when power is supplied only to the Cisco router.
Blinks green when a power fault is detected in the V384+A.
Blinks red when a power fault is detected in the Cisco router.
Blinks amber when a power fault is detected in both the V384+A and the Cisco
router.
router.
Device Status Indications Provided by WiFi LEDs
The three WiFi LEDs are grouped together on the interface panel of the V390i: Ethernet
(E), Status (S), and Radio (RF). These LEDs are used in combination to determine
overall V390i device status.
(E), Status (S), and Radio (RF). These LEDs are used in combination to determine
overall V390i device status.
To determine the status of the device, find the combination of LED colors in the
following table.
following table.
Table 7: Device Status as Indicated by WiFi LEDs
Ethernet LED
Color
Color
Radio LED Color Status LED
Color
Device Status
Green Green -
Boot loader DRAM memory
test.
test.
- Red
Amber
Boot loader board initialization
test.
test.
-
Blinking Green
Blinking Green
Boot loader flash memory test.
Amber -
Green Boot loader Ethernet
initialization test.
Green Green Green Boot loader starting router
software.