Accton Wireless Broadband Corp. FIU176205000W User Manual

Page of 134
Initial Configuration
4-12
4
• PPTP Network Mode: Sets a PPTP network mode. (Default: DHCP)
• IP Address: Sets the static IP address. (Default: 0.0.0.0, available when PPTP 
Network Mode is set to static IP.)
• Subnet Mask: Sets the static IP subnet mask. (Default: 255.255.255.0, available 
when PPTP Network Mode is set to static IP.)
• Default Gateway: The IP address of the gateway router for the wireless AP/
Router, which is used if the requested destination address is not on the local 
subnet.
• PPTP Username: Sets the PPTP user name for the WAN port. 
(Default: PPTP_USERNAME; Range: 1~32 characters)
• PPTP Password: Sets a PPTP password for the WAN port. (Default: 
PPTP_PASSWORD; Range: 1~32 characters)
L2TP
Enables the Layer Two Tunneling Protocol (L2TP) for implementing virtual private 
networks. The service is provided in many European countries. 
Figure 4-14.   Setup Wizard - WAN L2TP